Harbor Freight Tools 98579 operating instructions For technical questions, please call

Page 3

7.Only use the Stand on a flat, dry, level surface capable of supporting the weight of the Stand and its load.

8.Do not exceed the Stand’s maximum load capacity of 66 pounds. Beware of dynamic loading! Suddenly dropping load may create for a brief instance an excess load which may result in personal injury and/or property damage.

9.Do not move the Stand with a load attached. The Stand could tip over, resulting in personal injury and/or property damage.

10.Do not allow anyone to sit or stand on this Stand.

11.Do not leave the Stand unattended when it is under a load. Remove the load before leaving. Do not use to support loads for extended periods of time.

12.The warnings and instructions discussed in instruction manual cannot cover

all possible conditions and situations that may occur. It must be understood by operator that common sense and caution are factors which cannot be built into product, but must be supplied by operator.

Save these instructions.

SKU 98579

For technical questions, please call 1-800-444-3353.

Page 3

Image 3
Contents With Tool Tray For technical questions or replacement parts, please callFor technical questions, please call Save This ManualFor technical questions, please call See Figure D For technical questions, please call SpecificationsAssembly Instructions UnpackingSee Figure Figure ESee Figure J See Figure KSee Figure L See Figure O Operating InstructionsPlease Read Following Carefully Maintenance ServicingPart Description Qty Parts List & Assembly Diagram