| Protector |
| HEAD |
BOLT (8) | (22) |
| BAR (6) |
|
|
| |
|
|
| NUT (9) |
FIGURE E
5.Attach the Protector (22) to the crossbeam of the Head Bar (6), using one Bolt (8) and one Nut (9). Repeat this procedure for the remaining Protector and Head Bar. (See Figure E.)
FIGURE H
CONNECTORKNOB
(23)BOLT (16)
Brake CAP (24)
8.Secure the Mounting Curve (10) in position, using one Knob Bolt (16) and one Brake Cap (24). (See Figure H.)
FIGURE F |
|
| Mounting | |
|
| |||
|
| Curve (10) | ||
| SCREWS (17) | |||
|
|
| Adjustable | |
|
|
|
| Saddle (18) |
6.Attach the Adjustable Saddle (18) to the Mounting Curve (10), using two Screws (17). (See Figure F.)
FIGURE G
Mounting
Curve (10)
7.Position the Mounting Curve (10) as shown. (See Figure G.)
FIGURE I
Knob
Bolt (16)Mounting
Curve (10)
Front Wheel
Stabilizers (15)
Knob
NUT (11)
9.Attach the two Front Wheel Stabilizers
(15)to the Mounting Curve (10), using one Knob Nut (11) and one Knob Bolt
(16).(See Figure I.)
SKU 98579 | For technical questions, please call | Page 5 |