Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
1.Locate the Stand on a clean, dry, flat, and level surface capable of supporting the weight of the Stand, bicycle, bicycle parts, tools, etc.
Adjustable | Top | ||
Saddle (21) | |||
Saddle (18) |
| ||
| |||
FIGURE N
2.With assistance, set the bicycle on the Stand, making sure the frame of the bicycle is resting on the Adjustable Saddle (18) and Top Saddle (21). Then adjust the Clamp Knob (7) so that the
Hook Clamp (19) fits tightly over the bicycle frame. (See Figures N and O.)
3.Swing the two Front Wheel Stabilizers (15) next to the front wheel of the bicycle to limit its movement while you work on the bicycle.
FIGURE O
Knob
Bolt (16)
4.To swivel the bicycle upward or downward loosen the Knob Bolt (16). Move the bicycle to the desired position. Then retighten the Knob Bolt.
(See Figure O.)
5.When finished repairing the bicycle, loosen the Clamp Knob (7) and remove the Hook Clamp (19) from the bicycle frame. With assistance, remove the bicycle from the Stand. (See Figure K.)
6.Store the Stand in a clean, dry, and safe location out of reach of children and other unauthorized persons.
REV 09l |
|
|
SKU 98579 | For technical questions, please call | Page 7 |