Harbor Freight Tools 98579 operating instructions Specifications, Unpacking, Assembly Instructions

FIGURE A

NUT (9)

1. Attach the Leg (5) to the Foot (2), using two Bolts (8) and two Nuts (9). Repeat this procedure for the remaining Leg and Foot. (See Figure A.)

FOOT (2)

Specifications

Weight Capacity	66 lb.
Bicycle Capacity	1
Dimensions	24-3/4” L x 37-1/2” W x 41-1/2” H

Unpacking

When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible.

ASSEMBLY INSTRUCTIONS

Read the entire Important Safety Information section at the beginning of manual including all text under subheadings therein before set up or use of this product.

Note: For additional information regarding the parts listed in following pages, refer to Assembly Diagram near end of manual.

LEG (5)

BOLT (8)

FIGURE B Bolt (8)

HEAD BAR (6) NUT (9) LEG (5)

2.Attach the Head Bar (6) to end of the Leg (5), using two Bolts (8) and two Nuts (9). Repeat this procedure for the remaining Head Bar and Leg. (See Figure B.)

FIGURE C

NUT (9) BOLT (8)

TOP

SADDLE (21)

HEAD

BAR (6)

3.Attach the Top Saddle (21) to both ends of the Head Bars (6), using four Bolts (8) and four Nuts (9). (See Figure C.)

Socket	KNOB
Head
SCREW (12)	NUT (11)

FIGURE D

4. Attach the Connector (23) to the upper

	portions of the two Head Bars (6) using
	one Bolt (8), one Nut (9), one Knob Nut
	(11), and one Socket Head Screw (12).
	(See Figure D.)
Page 4	For technical questions, please call 1-800-444-3353.	SKU 98579