SECTION 4 − ADJUSTING HEADGEAR
| . There are four headgear adjust- |
| ments: headgear top, tightness, |
| angle adjustment, and distance |
| adjustment. |
| 1 Headgear Top |
| Adjusts headgear for proper depth |
| on the head to ensure correct bal- |
1 | ance and stability. |
32 Headgear Tightness
To adjust, push in the adjusting knob located on the back of the headgear
|
| and turn left or right to desired tight- | ||
|
| ness. | ||
|
| . If adjustment is limited, it may be | ||
|
|
| necessary to remove the com- | |
|
|
| fort cushion. | |
|
| 3 | Distance Adjustment | |
|
| Adjusts the distance between the | ||
|
| face and the lens. To adjust, loosen | ||
|
| both outside tension knobs and | ||
|
| press inward to free from adjustment | ||
|
| slots. Move forward or back to de- | ||
|
| sired position and retighten. (Both | ||
|
| sides must be equally positioned for | ||
|
| proper vision.) | ||
|
| 4 | Angle Adjustment | |
2 | 4 | Four pins on the right side of the | ||
headband top provide adjustment | ||||
|
| |||
for the forward tilt of the helmet. To adjust, loosen the right outside ten- sion adjustment knob then lift on the control arm tab and move it to the de- sired position. Retighten tension ad- justment knob.
. When using the back distance
adjustment positions, only the back three angle adjustment pins can be used.
804 118