Miller Electric Digital Elitet manual Sensitivity Control, Recommended Sensitivity Settings

Page 9
Adjust helmet sensitivity in lighting con- ditions helmet will be used in.
Press Sensitivity Low button to lower setting to 0.

3-5. Sensitivity Control

1 Sensitivity Control Buttons

Use Sensitivity Control Low and Hi buttons to make the lens more responsive to differ- ent light levels in various welding pro- cesses. Use a sensitivity setting of 5 for most applications.

The sensitivity ranges for each mode are as follows:

Weld, Cutting, X Modes − 0 − 10

Grind Mode − No sensitivity adjustment

It may be necessary to adjust helmet sensi- tivity to accommodate different lighting con- ditions or if lens is flashing On and Off. Ad- just helmet sensitivity as follows:

1 .

S

S Face the helmet in the direction of use,

exposing it to the surrounding light con- ditions.

S Press Sensitivity Hi button repeatedly

until the lens darkens, then press Low button until lens clears. Helmet is ready for use. Slight readjustment may be necessary for certain applications or if lens is flashing on and off.

805 010

Recommended Sensitivity Settings

Stick Electrode

Mid-Range

 

 

Short Circuiting (MIG)

Low/Mid-Range

 

 

Pulsed & Spray (MIG)

Mid-Range

 

 

Gas Tungsten Arc (TIG)

Mid/High-Range

 

 

Plasma Arc Cutting/Welding

Low/Mid-Range

 

 

Grinding

No sensitivity setting; use Grind mode

 

 

OM-234 388 Page 7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents OM-234 388B 2007−08 Table of Contents Symbol Usage − Safety Precautions − Read Before UsingHazards ARC Rays can burn eyes and skin Noise can damage hearingMet to ambient temperature before welding − SpecificationsAll shades provide continu Ous UV and IR protectionHelmet Controls − Operating InstructionsOn-Off Button And Low Battery Indicator Nearby welding may affect hel Mode ControlVariable Shade Control Sensitivity ranges for each mode are as follows Recommended Sensitivity SettingsGrind Mode − No sensitivity adjustment Sensitivity ControlThere is no lens delay adjust- ment in the Grind mode Lens Delay ControlAdjusting Lens Assembly Lens Adjustment Procedure− Adjusting Headgear − Replacing the Lens Covers Outside Lens CoverInside Lens Cover − Replacing the Battery − Maintenance − Installing Optional Magnifying LensTo prevent lens fogging, install Ward auto-darkening lensTo the clear state − TroubleshootingMiller − Parts List079 Replacement O-rings For Kit 770 248 5 Per Pkg 216 770 Ratchet Headgear Assembly Includes Items 9 And 10Adjustment Hardware Kit With O-rings OM-234 388 216Effective January 1 − Limited WarrantyVisit our website at Miller Electric Mfg. Co
Top Page Image Contents