3-3. Mode Control
1 Mode Control Button
Press button to select the mode ap- propriate for the work activity:
Weld Mode − used for most welding applications. In this mode the lens turns on when it optically senses a welding arc. Adjust shade, sensitivity, and delay settings as needed.
Cutting Mode − used for cutting ap- plications. In this mode the lens turns on when it optically senses a cutting arc. Adjust shade, sensitivity, and delay settings as needed.
Grind Mode − used for metal grinding applications. In this mode the shade is fixed shade No. 3. No lens adjust- ments are possible.
X Mode − used for outdoor or low cur- rent welding applications. In this mode the lens turns on when it senses weld current. Adjust shade, sensitivity, and delay settings as needed.
. Nearby welding may affect hel-
met operation when lens is in X Mode. Stay at least 12 ft (3.7 m) away from other welding activity.
1
805 010