Miller Electric Digital Elitet manual Replacing the Battery

Page 14

SECTION 6 − REPLACING THE BATTERY

1

+	+
	Be sure Positive
	(+) side of battery
	faces up.

To replace the batteries, re- move the auto-darkening lens assembly (see Section 5).

1 Battery Tray

After removing the lens as- sembly, slide the battery hold- ing trays out and remove the old batteries.

Replace with CR2450 lithium type batteries (2 required) or equivalent (Miller Part No. 217043).

.Be sure Positive (+) side

of the battery faces up (to- ward inside of helmet).

Reinstall the battery trays. To test, press the On button. The display screen should turn on. Reinstall the lens assembly.

.Left and right battery trays

are not interchangeable. The auto−darkening hel- met will not work if battery trays are installed on the wrong sides.

805 010

OM-234 388 Page 12

Image 14

Contents OM-234 388B 2007−08 Table of Contents Hazards ARC Rays can burn eyes and skin − Safety Precautions − Read Before UsingSymbol Usage Noise can damage hearingAll shades provide continu − SpecificationsMet to ambient temperature before welding Ous UV and IR protection− Operating Instructions Helmet ControlsOn-Off Button And Low Battery Indicator Mode Control Nearby welding may affect helVariable Shade Control Grind Mode − No sensitivity adjustment Recommended Sensitivity SettingsSensitivity ranges for each mode are as follows Sensitivity ControlLens Delay Control There is no lens delay adjust- ment in the Grind modeLens Adjustment Procedure Adjusting Lens Assembly− Adjusting Headgear Inside Lens Cover − Replacing the Lens CoversOutside Lens Cover − Replacing the Battery To prevent lens fogging, install − Installing Optional Magnifying Lens− Maintenance Ward auto-darkening lens− Troubleshooting To the clear state− Parts List MillerAdjustment Hardware Kit With O-rings OM-234 388 770 Ratchet Headgear Assembly Includes Items 9 And 10079 Replacement O-rings For Kit 770 248 5 Per Pkg 216 216− Limited Warranty Effective January 1Miller Electric Mfg. Co Visit our website at