JVC UX-G6R, XT-UXG6R, SP-UXG6, AX-UXG6 Connecting Speakers, To connect an external AM antenna

Page 11

Continued

AM antenna

ANTENNA

Vinyl-covered wire

(not supplied)

 

 

AM

 

LOOP

AM

 

EXT

 

FM 75

 

COAXIAL

 

AM loop antenna (supplied)

Connecting Speakers

You can connect the speakers using the speaker cords.

1

2, 3

 

 

Red

Speaker Cord

 

Speaker Cord

 

 

RIGHT

LEFT

SPEAKERS

 

Black

 

Right speaker

 

Left speaker

1 Connect the AM loop antenna to the AM LOOP terminals as illustrated.

2 Turn the AM loop antenna until you have the best reception.

To connect an external AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. (The AM loop antenna must remain connected.)

For better reception of both FM and AM

• Make sure the antenna conductors do not touch any other terminals and connecting cables.

•Keep the antennas away from metallic parts of the units, connecting cables, and the AC power cord.

1 Open the speaker terminal.

2 Insert the end of the speaker cord to the terminal.

Match the polarity of the speaker terminals: Red (+) to red (+) and black (–) to black (–).

3 Close the speaker terminal on the rear of the unit.

When connecting speaker cords

• Make sure to connect the cords correctly following the right series of above steps.

During operation, wrong connection or a short circuit make the power turned off to protect the system.

The clock loses the setting and is reset to “0:00”. Also the MD recording may fail.

•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents UX-G6R 10 cm STANDBY/ON lamp15 cm Class Laser Product Introduction PrecautionsContents Display window Location of the Buttons and ControlsFront Panels Compact Disc/Tuner Stereo AmplifierFor Tuner operations, press FM/AM button on Remote ControlTo operate the system correctly using the remote control Remote SensorGetting Started Putting the Batteries into the Remote ControlConnecting the System Control Cables and the External Wire When connecting the system control cables to the connectorsTo connect an outdoor FM antenna Connecting MD Recorder XM-G6 Connecting AntennasConnecting Sub Woofer System Supplied FM antennaClose the speaker terminal on the rear of the unit Connecting SpeakersAM antenna To connect an external AM antennaTo audio output Connecting Other EquipmentsAC wall outlet To AnalogSetting the Display Illumination Dimmer Basic SettingsSetting the Clock Common Operations Turning On the Power and Selecting the SourcesAdjusting the Volume Using buttonReinforcing the Bass Sound Adjusting Bass and Treble SoundsTo adjust the bass To adjust the trebleInner Buttons When turning off the systemPress AUX button to select an external source Listening to FM and AM Broadcasts Tuning in a StationAuto Tuning Preset Station TuningTo change the FM reception mode Presetting StationsTo preset stations manually Manual Preset To preset stations automatically Auto PresetChanging the RDS Information Receiving FM Stations with RDSSearching for Programs by PTY Codes PTY Search Switching to a Program Type TemporarilyMore about the EON function How the EON function actually worksDescription of the PTY codes Disc tray closes while the information appears Playing Back a CDPlaying Back the Entire Disc Normal Play Press 0open/close button againTo search and skip to a particular point in a track Programing the Playing Order of the Tracks Program PlaySearching and Skipping Tracks To go to another trackTo modify the program To exit from the Program play modeTo check the program contents To erase all the programed dataRepeating Tracks Repeat Play To exit from Random play modeTo exit from Repeat play mode Playing at Random Random PlayDo not use tapes longer than 120 minutes Playing Back a TapePress 0open/close button on the cassette deck unit To skip backward to the current music Fast-Winding a TapeMusic Scan Playing Back Dolby-Recorded TapePress REC Pause button on the cassette deck unit Recording onto a TapeManual Recording onto a Tape Recording in Auto Reverse Recording an external audio source manually Synchronized Recording from a CDRecording from the External Equipment How Recording Timer actually works Using the TimersUsing Recording Timer After completing the settings Using Daily TimerHow Daily Timer actually works To use the same Recording Timer settings repeatedlyDaily timer indicator To use the same Daily Timer settings repeatedlyRecording Timer Sleep Timer Daily Timer Using Sleep Timer Timer PriorityHow Sleep Timer actually works Sleep Timer has priority over Daily TimerGeneral Notes Maintenance and Additional InformationHandling CDs Handling Cassette Tapes Types of Cassette Tapes Possible Cause TroubleshootingCassette Deck SpecificationsSupplied Accessories Stereo Amplifier AX-UXG61299JTMMDWJSC

TD-UXG6, AX-UXG6, SP-UXG6, UX-G6R, XT-UXG6R specifications

The JVC SP-UXG6, TD-UXG6, AX-UXG6, XT-UXG6R, and UX-G6R are a series of compact and versatile audio systems that cater to a wide audience of music enthusiasts and casual listeners alike. These models highlight JVC’s commitment to delivering high-quality sound and user-friendly features, making them ideal for home audio setups.

One of the standout features of the JVC UX-G6 series is the inclusion of a powerful amplifier that enhances audio clarity and depth, ensuring an immersive listening experience. The systems are designed for both CD playback and connectivity with portable music devices, thanks to their integrated AUX inputs. Many models in the series also support USB playback, allowing users to play their favorite tracks directly from flash drives, making it more convenient to access their music libraries.

The SP-UXG6, with its sleek design, is tailored for those who appreciate aesthetics as much as performance. It provides excellent sound output with a well-balanced audio profile, making it suitable for various genres. The TD-UXG6 model stands out with its dual cassette deck, catering to those who still enjoy nostalgic playback of cassettes while also incorporating modern features.

The AX-UXG6 boasts advanced digital signal processing technology, which enhances sound quality by optimizing the audio output for different types of music. This ensures a richer and more dynamic sound experience, making it great for both casual listening and critical appreciation. For audiophiles, the XT-UXG6R offers enhanced features such as a built-in equalizer, allowing users to fine-tune the audio settings to their liking.

Finally, the UX-G6R combines versatility and functionality, featuring a radio tuner alongside its main playback functions. This model is particularly appealing for those who enjoy catching live broadcasts while also having the option to play their personal music collection.

Overall, the JVC UX-G6 series is a versatile and stylish choice for audio lovers, equipped with cutting-edge features and technology that cater to a diverse range of musical preferences. Whether you are a casual listener or a seasoned audiophile, these systems offer exceptional performance and flexibility, ensuring an enjoyable music experience.
Top Page Image Contents