JVC SP-UXG6, XT-UXG6R, UX-G6R, AX-UXG6, TD-UXG6 manual Handling Cassette Tapes Types of Cassette Tapes

Page 37

Handling Cassette Tapes

Types of Cassette Tapes

 

 

 

Cautions regarding handling

•Do not touch the surface of the tape or pull the tape out of the cassette.

•Tape spooled loosely around the hubs is likely to jam in the pinch rollers and capstans. Before loading the tape into the cassette tray, take up the slack in the tape as shown below.

This cassette deck unit incorporates an Automatic Tape Detection function. This mechanism uses the tape-type detection holes to distinguishes which type of tape was inserted, and sets the bias and equalizer to the optimum settings for that tape automatically.

The following types of tapes may be used with this cassette deck unit.

Normal tape

TYPE I

BIAS: NORMAL

EQ: 120µs

Tape storage

•Place tapes in their cases for storage.

•Avoid storing tapes on top of TVs or speakers, in sunlight or places of high temperature, or in humid or dusty areas.

Normal (No detection slots) Tab

(to prevent accidental erasure)

To prevent accidental erasure

•Cassette tapes have tabs to prevent accidental erasure.

•If you remove the tabs after making a recording, the cassette deck cannot be set to record when that tape is loaded. Remove the tabs so that valuable recordings will not be accidentally erased.

High position (CrO2) tape

TYPE II

BIAS: HIGH

EQ: 70µs

Recording (erasure) is not possible when the tabs are

removed.

High position

 

detection slots

Metal tape

(only for playback)

TYPE IV

 

BIAS: METAL

EQ:

70µs

For reverse side (B) For front side (A)

• To make another recording on a tape whose tabs have

been removed, cover the tab holes with adhesive tape.

Tape-type detection slot

Adhesive tape

DO NOT cover the tape-type detection slots.

Metal detection slots

•Certain early period Metal and High position (CrO2) tapes may not have tape-type detection slots. The cassette deck unit cannot obtain the correct characteristics for these tapes.

•Ferrochromite (FeCr) TYPE III tapes cannot be used with this cassette deck unit.

34

Page 36 Page 38
Image 37
Page 36 Page 38
Contents UX-G6R 15 cm STANDBY/ON lamp10 cm Class Laser Product Introduction PrecautionsContents Front Panels Location of the Buttons and ControlsDisplay window Compact Disc/Tuner Stereo AmplifierTo operate the system correctly using the remote control Remote ControlRemote Sensor For Tuner operations, press FM/AM button onConnecting the System Control Cables and the External Wire Putting the Batteries into the Remote ControlWhen connecting the system control cables to the connectors Getting StartedConnecting Sub Woofer System Connecting MD Recorder XM-G6 Connecting AntennasSupplied FM antenna To connect an outdoor FM antennaAM antenna Connecting SpeakersTo connect an external AM antenna Close the speaker terminal on the rear of the unitAC wall outlet Connecting Other EquipmentsTo Analog To audio outputSetting the Clock Basic SettingsSetting the Display Illumination Dimmer Adjusting the Volume Turning On the Power and Selecting the SourcesUsing button Common OperationsTo adjust the bass Adjusting Bass and Treble SoundsTo adjust the treble Reinforcing the Bass SoundPress AUX button to select an external source When turning off the systemInner Buttons Auto Tuning Tuning in a StationPreset Station Tuning Listening to FM and AM BroadcastsTo preset stations manually Manual Preset Presetting StationsTo preset stations automatically Auto Preset To change the FM reception modeChanging the RDS Information Receiving FM Stations with RDSSearching for Programs by PTY Codes PTY Search Switching to a Program Type TemporarilyMore about the EON function How the EON function actually worksDescription of the PTY codes Playing Back the Entire Disc Normal Play Playing Back a CDPress 0open/close button again Disc tray closes while the information appearsSearching and Skipping Tracks Programing the Playing Order of the Tracks Program PlayTo go to another track To search and skip to a particular point in a trackTo check the program contents To exit from the Program play modeTo erase all the programed data To modify the programTo exit from Repeat play mode To exit from Random play modePlaying at Random Random Play Repeating Tracks Repeat PlayPress 0open/close button on the cassette deck unit Playing Back a TapeDo not use tapes longer than 120 minutes Music Scan Fast-Winding a TapePlaying Back Dolby-Recorded Tape To skip backward to the current musicManual Recording onto a Tape Recording onto a TapePress REC Pause button on the cassette deck unit Recording in Auto Reverse Recording from the External Equipment Synchronized Recording from a CDRecording an external audio source manually Using Recording Timer Using the TimersHow Recording Timer actually works How Daily Timer actually works Using Daily TimerTo use the same Recording Timer settings repeatedly After completing the settingsDaily timer indicator To use the same Daily Timer settings repeatedlyHow Sleep Timer actually works Using Sleep Timer Timer PrioritySleep Timer has priority over Daily Timer Recording Timer Sleep Timer Daily TimerHandling CDs Maintenance and Additional InformationGeneral Notes Handling Cassette Tapes Types of Cassette Tapes Possible Cause TroubleshootingSupplied Accessories SpecificationsStereo Amplifier AX-UXG6 Cassette Deck1299JTMMDWJSC

TD-UXG6, AX-UXG6, SP-UXG6, UX-G6R, XT-UXG6R specifications

The JVC SP-UXG6, TD-UXG6, AX-UXG6, XT-UXG6R, and UX-G6R are a series of compact and versatile audio systems that cater to a wide audience of music enthusiasts and casual listeners alike. These models highlight JVC’s commitment to delivering high-quality sound and user-friendly features, making them ideal for home audio setups.

One of the standout features of the JVC UX-G6 series is the inclusion of a powerful amplifier that enhances audio clarity and depth, ensuring an immersive listening experience. The systems are designed for both CD playback and connectivity with portable music devices, thanks to their integrated AUX inputs. Many models in the series also support USB playback, allowing users to play their favorite tracks directly from flash drives, making it more convenient to access their music libraries.

The SP-UXG6, with its sleek design, is tailored for those who appreciate aesthetics as much as performance. It provides excellent sound output with a well-balanced audio profile, making it suitable for various genres. The TD-UXG6 model stands out with its dual cassette deck, catering to those who still enjoy nostalgic playback of cassettes while also incorporating modern features.

The AX-UXG6 boasts advanced digital signal processing technology, which enhances sound quality by optimizing the audio output for different types of music. This ensures a richer and more dynamic sound experience, making it great for both casual listening and critical appreciation. For audiophiles, the XT-UXG6R offers enhanced features such as a built-in equalizer, allowing users to fine-tune the audio settings to their liking.

Finally, the UX-G6R combines versatility and functionality, featuring a radio tuner alongside its main playback functions. This model is particularly appealing for those who enjoy catching live broadcasts while also having the option to play their personal music collection.

Overall, the JVC UX-G6 series is a versatile and stylish choice for audio lovers, equipped with cutting-edge features and technology that cater to a diverse range of musical preferences. Whether you are a casual listener or a seasoned audiophile, these systems offer exceptional performance and flexibility, ensuring an enjoyable music experience.
Top Page Image Contents