JVC XT-UXG6R Adjusting Bass and Treble Sounds, Reinforcing the Bass Sound, To adjust the bass

Page 15

Continued

•When using the remote control, press VOLUME+ button to increase the volume level or press VOLUME –button to decrease it.

The volume level (from 0 to 50) appears in the display window as follows:

Adjusting Bass and Treble Sounds

You can adjust bass and treble sound effects with the remote control, conforming to your preference and acoustic surroundings.

You can use this effect only while listening sources.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume level before connecting or putting headphones.

MOS - FET

PHONES jack

AUTO

REVERSE

DO NOT turn off the system with the volume level set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the system or start playing any source.

REMEMBER you cannot adjust the volume level while the system is turned off.

Reinforcing the Bass Sound

The richness and fullness of the bass sound is maintained regardless of how low you set the volume level.

You can use this effect only while listening sources.

•To get the effect, press ACTIVE BASS EX. button on the remote control, and its indicator lights in the display window.

•To cancel the effect, press the button again so that the indicator goes off.

To adjust the bass

1 Press BASS button.

The current level settings shortly appears as follows:

To exit from the level setting, press the button again.

2 Press UP/DOWN button to adjust the level.

•Press UP button to increase the bass tone level.

•Press DOWN button to decrease the bass tone level.

The bass level can be adjusted in seven steps from –3 through 0 to +3 (step “0” makes no effect).

To cancel the effect, adjust the level to “0.”

To adjust the treble

1 Press TREBLE button.

The current level settings shortly appears as follows:

To exit from the level setting, press the button again.

2 Press UP/DOWN button to adjust the level.

•Press UP button to increase the treble tone level.

•Press DOWN button to decrease the treble tone level.

The treble level can be adjusted in seven steps from –3 through 0 to +3 (step “0” makes no effect).

To cancel the effect, adjust the level to “0.”

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents UX-G6R STANDBY/ON lamp 15 cm10 cm Class Laser Product Introduction PrecautionsContents Location of the Buttons and Controls Front PanelsDisplay window Compact Disc/Tuner Stereo AmplifierFor Tuner operations, press FM/AM button on Remote ControlTo operate the system correctly using the remote control Remote SensorGetting Started Putting the Batteries into the Remote ControlConnecting the System Control Cables and the External Wire When connecting the system control cables to the connectorsTo connect an outdoor FM antenna Connecting MD Recorder XM-G6 Connecting AntennasConnecting Sub Woofer System Supplied FM antennaClose the speaker terminal on the rear of the unit Connecting SpeakersAM antenna To connect an external AM antennaTo audio output Connecting Other EquipmentsAC wall outlet To AnalogBasic Settings Setting the ClockSetting the Display Illumination Dimmer Common Operations Turning On the Power and Selecting the SourcesAdjusting the Volume Using buttonReinforcing the Bass Sound Adjusting Bass and Treble SoundsTo adjust the bass To adjust the trebleWhen turning off the system Press AUX button to select an external sourceInner Buttons Listening to FM and AM Broadcasts Tuning in a StationAuto Tuning Preset Station TuningTo change the FM reception mode Presetting StationsTo preset stations manually Manual Preset To preset stations automatically Auto PresetChanging the RDS Information Receiving FM Stations with RDSSearching for Programs by PTY Codes PTY Search Switching to a Program Type TemporarilyMore about the EON function How the EON function actually worksDescription of the PTY codes Disc tray closes while the information appears Playing Back a CDPlaying Back the Entire Disc Normal Play Press 0open/close button againTo search and skip to a particular point in a track Programing the Playing Order of the Tracks Program PlaySearching and Skipping Tracks To go to another trackTo modify the program To exit from the Program play modeTo check the program contents To erase all the programed dataRepeating Tracks Repeat Play To exit from Random play modeTo exit from Repeat play mode Playing at Random Random PlayPlaying Back a Tape Press 0open/close button on the cassette deck unitDo not use tapes longer than 120 minutes To skip backward to the current music Fast-Winding a TapeMusic Scan Playing Back Dolby-Recorded TapeRecording onto a Tape Manual Recording onto a TapePress REC Pause button on the cassette deck unit Recording in Auto Reverse Synchronized Recording from a CD Recording from the External EquipmentRecording an external audio source manually Using the Timers Using Recording TimerHow Recording Timer actually works After completing the settings Using Daily TimerHow Daily Timer actually works To use the same Recording Timer settings repeatedlyDaily timer indicator To use the same Daily Timer settings repeatedlyRecording Timer Sleep Timer Daily Timer Using Sleep Timer Timer PriorityHow Sleep Timer actually works Sleep Timer has priority over Daily TimerMaintenance and Additional Information Handling CDsGeneral Notes Handling Cassette Tapes Types of Cassette Tapes Possible Cause TroubleshootingCassette Deck SpecificationsSupplied Accessories Stereo Amplifier AX-UXG61299JTMMDWJSC

TD-UXG6, AX-UXG6, SP-UXG6, UX-G6R, XT-UXG6R specifications

The JVC SP-UXG6, TD-UXG6, AX-UXG6, XT-UXG6R, and UX-G6R are a series of compact and versatile audio systems that cater to a wide audience of music enthusiasts and casual listeners alike. These models highlight JVC’s commitment to delivering high-quality sound and user-friendly features, making them ideal for home audio setups.

One of the standout features of the JVC UX-G6 series is the inclusion of a powerful amplifier that enhances audio clarity and depth, ensuring an immersive listening experience. The systems are designed for both CD playback and connectivity with portable music devices, thanks to their integrated AUX inputs. Many models in the series also support USB playback, allowing users to play their favorite tracks directly from flash drives, making it more convenient to access their music libraries.

The SP-UXG6, with its sleek design, is tailored for those who appreciate aesthetics as much as performance. It provides excellent sound output with a well-balanced audio profile, making it suitable for various genres. The TD-UXG6 model stands out with its dual cassette deck, catering to those who still enjoy nostalgic playback of cassettes while also incorporating modern features.

The AX-UXG6 boasts advanced digital signal processing technology, which enhances sound quality by optimizing the audio output for different types of music. This ensures a richer and more dynamic sound experience, making it great for both casual listening and critical appreciation. For audiophiles, the XT-UXG6R offers enhanced features such as a built-in equalizer, allowing users to fine-tune the audio settings to their liking.

Finally, the UX-G6R combines versatility and functionality, featuring a radio tuner alongside its main playback functions. This model is particularly appealing for those who enjoy catching live broadcasts while also having the option to play their personal music collection.

Overall, the JVC UX-G6 series is a versatile and stylish choice for audio lovers, equipped with cutting-edge features and technology that cater to a diverse range of musical preferences. Whether you are a casual listener or a seasoned audiophile, these systems offer exceptional performance and flexibility, ensuring an enjoyable music experience.
Top Page Image Contents