JVC AX-UXG6, XT-UXG6R, UX-G6R Presetting Stations, To preset stations manually Manual Preset

Page 18

Continued

Presetting Stations

You can preset up to 30 FM and 15 AM (MW/LW) stations into memory by following two methods: manual/automatic presettings.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

To preset stations manually — Manual Preset

1 Press 4/ ¢(lower/higher frequencies) button to tune in the desired station manually.

2 Press SET button.

“SET” appears in the display window for a while (not blinking).

•Note that “SET” message disappears, presetting procedure is cancelled.

3 Rotate MULTI JOG dial or press repeatedly UP/ DOWN button to select the preset channel numbered from 1 to 30 on FM, or 1 to 15 on AM.

•Note that the selected channel “02” disappears, presetting procedure is cancelled.

4 Press SET button again.

“STORED” appears in the display window for a while.

5 The tuned station in step 1 is now stored in the preset channel selected in step 3.

Storing a new station on an used channel erases the previously stored one.

To preset stations automatically — Auto Preset

You can automatically preset 30 FM, 15 AM (MW/LW) stations. Preset numbers will be allocated as stations are found, starting from the lowest frequency and moving up to the higher frequency.

On the remote control only:

1 Press FM/AM button to select a desired band.

2 Press and hold AUTO PRESET button on the remote control for more than two seconds.

The system automatically starts searching for stations with the strong signals continuously, and they are stored successively into memory as follows:

Ç

Ç

Ç

When you unplug the AC power cord or if a power failure occurs

The preset stations will be erased in a few days.

If this happens, preset the stations again.

To change the FM reception mode

•When an FM stereo broadcast is hard to receive or noisy, press FM MODE button on the remote control so that MONO indicator lights in the display window. Reception improves.

•To restore the stereo effect, press FM MODE button again so that STEREO indicator lights in the display window.

In this stereo mode, you can hear stereo sounds when a program is broadcast in stereo.

15

Page 17 Page 19
Image 18
Page 17 Page 19
Contents UX-G6R STANDBY/ON lamp 15 cm10 cm Class Laser Product Precautions IntroductionContents Location of the Buttons and Controls Front PanelsDisplay window Stereo Amplifier Compact Disc/TunerRemote Sensor Remote ControlTo operate the system correctly using the remote control For Tuner operations, press FM/AM button onWhen connecting the system control cables to the connectors Putting the Batteries into the Remote ControlConnecting the System Control Cables and the External Wire Getting StartedSupplied FM antenna Connecting MD Recorder XM-G6 Connecting AntennasConnecting Sub Woofer System To connect an outdoor FM antennaTo connect an external AM antenna Connecting SpeakersAM antenna Close the speaker terminal on the rear of the unitTo Analog Connecting Other EquipmentsAC wall outlet To audio outputBasic Settings Setting the ClockSetting the Display Illumination Dimmer Using button Turning On the Power and Selecting the SourcesAdjusting the Volume Common OperationsTo adjust the treble Adjusting Bass and Treble SoundsTo adjust the bass Reinforcing the Bass SoundWhen turning off the system Press AUX button to select an external sourceInner Buttons Preset Station Tuning Tuning in a StationAuto Tuning Listening to FM and AM BroadcastsTo preset stations automatically Auto Preset Presetting StationsTo preset stations manually Manual Preset To change the FM reception modeReceiving FM Stations with RDS Changing the RDS InformationSwitching to a Program Type Temporarily Searching for Programs by PTY Codes PTY SearchHow the EON function actually works More about the EON functionDescription of the PTY codes Press 0open/close button again Playing Back a CDPlaying Back the Entire Disc Normal Play Disc tray closes while the information appearsTo go to another track Programing the Playing Order of the Tracks Program PlaySearching and Skipping Tracks To search and skip to a particular point in a trackTo erase all the programed data To exit from the Program play modeTo check the program contents To modify the programPlaying at Random Random Play To exit from Random play modeTo exit from Repeat play mode Repeating Tracks Repeat PlayPlaying Back a Tape Press 0open/close button on the cassette deck unitDo not use tapes longer than 120 minutes Playing Back Dolby-Recorded Tape Fast-Winding a TapeMusic Scan To skip backward to the current musicRecording onto a Tape Manual Recording onto a TapePress REC Pause button on the cassette deck unit Recording in Auto Reverse Synchronized Recording from a CD Recording from the External EquipmentRecording an external audio source manually Using the Timers Using Recording TimerHow Recording Timer actually works To use the same Recording Timer settings repeatedly Using Daily TimerHow Daily Timer actually works After completing the settingsTo use the same Daily Timer settings repeatedly Daily timer indicatorSleep Timer has priority over Daily Timer Using Sleep Timer Timer PriorityHow Sleep Timer actually works Recording Timer Sleep Timer Daily TimerMaintenance and Additional Information Handling CDsGeneral Notes Handling Cassette Tapes Types of Cassette Tapes Troubleshooting Possible CauseStereo Amplifier AX-UXG6 SpecificationsSupplied Accessories Cassette Deck1299JTMMDWJSC

TD-UXG6, AX-UXG6, SP-UXG6, UX-G6R, XT-UXG6R specifications

The JVC SP-UXG6, TD-UXG6, AX-UXG6, XT-UXG6R, and UX-G6R are a series of compact and versatile audio systems that cater to a wide audience of music enthusiasts and casual listeners alike. These models highlight JVC’s commitment to delivering high-quality sound and user-friendly features, making them ideal for home audio setups.

One of the standout features of the JVC UX-G6 series is the inclusion of a powerful amplifier that enhances audio clarity and depth, ensuring an immersive listening experience. The systems are designed for both CD playback and connectivity with portable music devices, thanks to their integrated AUX inputs. Many models in the series also support USB playback, allowing users to play their favorite tracks directly from flash drives, making it more convenient to access their music libraries.

The SP-UXG6, with its sleek design, is tailored for those who appreciate aesthetics as much as performance. It provides excellent sound output with a well-balanced audio profile, making it suitable for various genres. The TD-UXG6 model stands out with its dual cassette deck, catering to those who still enjoy nostalgic playback of cassettes while also incorporating modern features.

The AX-UXG6 boasts advanced digital signal processing technology, which enhances sound quality by optimizing the audio output for different types of music. This ensures a richer and more dynamic sound experience, making it great for both casual listening and critical appreciation. For audiophiles, the XT-UXG6R offers enhanced features such as a built-in equalizer, allowing users to fine-tune the audio settings to their liking.

Finally, the UX-G6R combines versatility and functionality, featuring a radio tuner alongside its main playback functions. This model is particularly appealing for those who enjoy catching live broadcasts while also having the option to play their personal music collection.

Overall, the JVC UX-G6 series is a versatile and stylish choice for audio lovers, equipped with cutting-edge features and technology that cater to a diverse range of musical preferences. Whether you are a casual listener or a seasoned audiophile, these systems offer exceptional performance and flexibility, ensuring an enjoyable music experience.
Top Page Image Contents