Vision Fitness T9600HRT manual Blue BAG, Data Cables

Page 6

STEP

STEP 2

STEP

STEP 3

2

3

BLUE BAG

•Mount the console to the console mast using four bolts (M8 x 15L) and tighten with the 5mm Allen wrench.

NOTE: Push all extra data cable into the console mast. Make sure not to pinch or cut the data cable.

•Mount the right-hand side mount handlebar to the console mast using two bolts (M8 x 135L). Repeat this on the left-hand side.

DATA CABLES

MODELS T9200, T9300, T9500HRT, T9600HRT & T9600HRT Comfort: Plug in the small data cable into the small plug connection on the lower control board. Plug in the large data cable into the large plug connection on the lower control board.

MODELS T9700S, T9700HRT & T9700 Runner: Plug the large 20- ribbon cable into the 20-pin connection on the lower control board. Slide down the rubber covers on the left & right console supports.

•Install the motor cover making sure that the rubber covers are inserted into the motor cover. Secure the motor cover using the six (M4 x 12L) screws (see Yellow bag).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents S e m b l y G u i d e S e m b l y I d e Parts BOX Orange BAG Yellow BAGT9700-SeriesSlide the data cable Blue BAG Data CablesAuto Calibration Models T9300, T9500HRT, T9600HRT & T9600HRT ComfortBelt Tension Clockwise 1/4-turn at a Time
Top Page Image Contents