
Product Information
Product Information
The 
The 
Specifications
The following table lists the 
Specifications
Dimensions (HWD)  | 
  | 
NWS without antenna  | 1.65" x 5.55" x 6.40" (4.19 cm x 14.10 cm x 16.20 cm)  | 
NWS with antenna  | 7.41" x 5.55" x 6.40" (18.82 cm x 14.10 cm x 16.20 cm)  | 
Faceplate  | 1.50" x 5.55" x 0.53" (3.80 cm x 14.10 cm x 1.30 cm)  | 
  | 
  | 
Weight  | 10.56 oz (299.37 g)  | 
  | 
  | 
Power Requirement  | 175 mA @ 12 VDC  | 
  | 
  | 
Enclosure  | Metal with black anodized matte finish  | 
  | 
  | 
Operating Frequency  | 2.4 GHz RF digital   | 
  | ViewPoints  | 
  | 
  | 
Control Compatibility  | Axcess Central Controllers  | 
  | NetLinx Central Controllers  | 
  | Landmark Controller  | 
  | 
  | 
Front Panel Components:  | 
  | 
AXlink LED  | Green LED that shows power and AXlink communication activity. Blink patterns  | 
  | include:  | 
  | • Off - No power or the controller is not functioning properly.  | 
  | • One blink per second - indicates power is active and AXlink data  | 
  | communication is functional.  | 
  | • Full On - Indicates power is active and AXlink data communication is not  | 
  | functional.  | 
  | 
  | 
Status LED  | Red LED that lights when an RF link is established with one or more devices.  | 
  | • If the light is On, the Server’s signal is locked and communicating with the  | 
  | ViewPoint.  | 
  | • If the light is Off, the Server is not communicating with the ViewPoint because  | 
  | the signal is either lost or broken.  | 
  | 
  | 
RX LED | Yellow LED that lights when the   | 
  | 
  | 
Group Address  | 8 position DIP switch that sets the GROUP ADDRESS (0 - 255)  | 
  | 
  | 
Group ID  | 4 position DIP switch that sets the control group identification (0 - 15)  | 
  | 
  | 
Rear Panel Components:  | 
  | 
Antenna  | |
  | 
  | 
1  | 
  | |
  | 
  | 
  |