Specifications | AMX AXR-NWS instruction

Product Information

Specifications (Cont.)

Connectors	4-pin (male) AXlink, 3.5 mm, bus connector; connects to the Central Controller
	for receiving and transmitting AXlink control data and 12 VDC power.

Optional Accessories:	• AC-RK Rack Mount Kit
	• PSN2.8 Power Supply
	• NWA-EXT (External Netwave Antenna)

	2	AXR-NWS NetWave Server

Image 6

AMX AXR-NWS instruction manual Specifications

Contents

AXR-NWS AMX Limited Warranty and Disclaimer Table of Contents Table of Contents Specifications SpecificationsProduct Information Specifications Installation Group ID Setting the Group Address Group Address DIP Switch Values Setting the Group Address DIP switch Setting the Device Address on a touch panel Setting Group ID DIP switches Setting the Group IDGroup ID DIP Switch Values Setting the Group ID on the touch panel Wiring Guidelines Connecting to the ControllerPower guidelines Using AXlink for data and power Installing the Control System Using AXlink for data with an auxiliary power supplyPreparing captive wires Specifications for the Optional NWA-EXT NWA-EXT Installation Firmware Upgrades Replacing the Firmware Chip Firmware Upgrades Installation AXR-NWS NetWave Server AMX,