Vision Fitness T9400HRT manual U E B a G

S T E P 2 B L U E B A G

S T E P 2

MODELS T9700HRT & T9700S: Slide the data cables down the right console support using the white wire tie as a guide. Make sure that the data cable (one large ribbon cable) goes through the large hole in the lower part of the console upright.

MODELS T9600HRT & T9500HRT: Slide the data cables down the right console support using the white wire tie as a guide. Make sure that the data cables (1 small & 1 large telephone style cable) go through the large hole in the lower part of the console upright.

MODELS T9400HRT, T9300 & T9200: Slide the data cables down the right console support using the white wire tie as a guide. Make sure that the data cables (1 small & 1 large telephone style cable) come out the bottom of the right console support.

•Mount the console to the console mast using four bolts (M8 X 20L) and tighten with the blue-handled 5MM Allen wrench.

NOTE: Push all extra data cable into the console mast. Make sure not to pinch or cut the data cable.

•Mount the right-hand side mount handlebar to the console mast using two bolts (M8 x 135L). Repeat this on the left-hand side.

6