S T E P 3 | S T E P 3 | D ATA C A B L E S |
|
|
MODELS T9200, T9300, T9400HRT, T9500HRT, T9600HRT: Plug in the small data cable into the small plug connection on the lower control board. Plug in the large data cable into the large plug connection on the lower control board.
MODELS T9700HRT & T9700S: Plug the large 20 ribbon cable into the 20 pin connection on the lower control board. Slide down the rubber covers on the left & right console supports.
• Install the motor cover making sure that the rubber covers are inserted into the motor cover. Secure the motor cover using the six (M5 x 10L) screws.
7