Vision Fitness T9400HRT manual E P 4 B E LT T E N S I O N

S T E P 4 B E LT T E N S I O N

S T E P 4

•If the running belt slips when used, use the supplied 8MM Allen wrench to turn the left and right tension bolts clockwise 1/4-turn at a time until the

belt no longer slips.

•If the running belt is too far to the right side, use the supplied 8MM Allen wrench to turn the right tension bolt clockwise 1/4-turn at a time until the

belt remains centered during use. If the running belt is too far to the left side, turn the left tension bolt clockwise 1/4-turn at a time until the belt remains centered during use.

500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551

toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www.visionfitness.com

2001 Vision Fitness. All Rights Reserved. 11.01 Part #Z92TM49-AG18.12PRD AG18.12PRD

REV2

4