Vision Fitness ST760 manual E P 6 Y E L L O W B a G

S T E P 6 Y E L L O W B A G

Q05Q06

Q01

Q03

Q02

AB1

•Align holes in rear shield (Q01) with the holes in the brackets on the back side of the weight stack tower (AB1); secure using 10 bolts (M5x10). Take the left side shield (Q03) and repeat on front side of weight stack tower using six bolts (M5x10). Tighten interior brackets (B09 & B10). Attach right side shield (Q02) with six bolts (M5x10)

•Place slip-on nuts over holes on the left upright of the weight stack tower (AB1). Snap two top covers (Q05 & Q06) together. With tallest point facing the rear of the machine, place the top covers on top of the weight stack tower and secure using six bolts (M5x15).

15