S T E P 7 | R E D B A G |
• Attach handlebars (AC2 & AC3) to side of main seat support (AC1) using two bolts (M10x75), four flat washers (10.2x22x2), two nylon nuts (M10).
• Secure seat bottom to seat support using four bolts (M10x25).
• Attach seat back to seat back post (AH1) using four bolts (M10x25). Slide the assembly into seat back post support. Thread pull pin into seat back post support until it locks seat back into position.
AH1
AC3
AC1
AC2
16