JVC MX-GA8 Playing Back Tapes, Playing Back a Tape, Press 0EJECT for the deck you want to use

Playing Back Tapes

English

Playing Back a Tape

1 Press 0EJECT for the deck you want to use.

For Deck B

For Deck A

2 Put a cassette in, with the exposed part of the tape down and the side you want to play facing front.

•You can play back only type I tapes.

3 Close the cassette holder gently.

If you put cassettes in both decks A and B, the last deck which you have put a cassette into is selected.

To operate the other deck, press TAPE A/B (or A/B on

the remote control).

4 Press TAPE 3.

The tape play starts and the tape running indicator (3) starts flashing slowly.

When the tape plays to the end, the deck automatically stops.

To stop during play, press 7.

To operate the other deck, press TAPE A/B (or A/B on the remote control), then TAPE 3.

To fast-forward the tape, press ¡(or ¢/¡on the remote control). The tape running indicator (3) starts flashing quickly.

To rewind the tape, press 1(or 4/1on the remote control). The tape running indicator (2) starts flashing quickly.

To remove the cassette, press 0 EJECT for deck A or

EJECT 0for deck B.

The use of the C-120 or thinner tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch- rollers and the capstans.