JVC MX-GA8 manual Using Sleep Timer, Timer Priority

English

4 Set the on-time you want the unit to turn on.

1)Turn the 4/¢ control to set the hour, then press SET.

2) Turn the 4/¢ control to set the minute, then press SET.

“OFF TIME” appears for 2 seconds, SET then the unit enters off-time setting

mode.

5 Set the off-time you want the unit to turn off (on standby).

Using Sleep Timer

With Sleep Timer, you can fall asleep to music. You can set Sleep Timer when the unit is turned on.

How Sleep Timer actually works

The unit automatically turns off after the specified time length passes.

On the remote control ONLY:

1 Press SLEEP.

The time length until the shut-off time appears and the SLEEP indicator starts flashing on the

1)Turn the 4/¢ control to set the hour, then press SET.

2)Turn the 4/¢ control to set the minute, then press SET.

The unit enters preset station selecting mode.

6 Select the preset station.

SET

display.

•Each time you press the button, the time length changes as follows:

SLEEP10 SLEEP20 SLEEP30 SLEEP60

OFF SLEEP120 SLEEP90

(Canceled)

2 Wait for about 3 seconds after specifying the time length.

1)Turn the 4/¢ control to select the band (“TUNER FM” or “TUNER AM”), then press SET.

2)Turn the 4/¢ control to select a preset channel number, then press SET.

The REC (recording timer) indicator stops		SET
flashing and remains lit. The settings you
have done are shown on the display in
sequence for your confirmation.
7 Press	STANDBY/ON to turn	STANDBY
		STANDBY/ON

off the unit (on standby) if necessary.

The SLEEP indicator stops flashing and remains lit.

To check the remaining time until the shut-off time, press SLEEP once so that the remaining time until the shut-off time appears for about 3 seconds.

To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display.

To cancel the setting, press SLEEP repeatedly until “OFF” appears on the display so that the SLEEP indicator goes off from the display.

• Sleep Timer is also canceled when you turn off the unit.

About the recording source

If you change the source while recording, the recording source also changes.

To turn on or off Recording Timer after its setting is done

1	Press CLOCK/TIMER repeatedly	CLOCK
	until “REC” appears on the display.	/ TIMER
2
	To turn off the Recording Timer,
		CANCEL
	press CANCEL/DEMO.	/ DEMO

The REC (recording timer) indicator

goes off from the display (“OFF” appears for a while). The Recording Timer is canceled, but the setting for the Recording Timer remains in memory until you change it.

To turn on the Recording Timer, SET

press SET.

The REC (recording timer) indicator

lights up on the display. The settings you have done are shown on the display in sequence for your confirmation.

Timer Priority

Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps.

Here are some examples.

•Recording Timer has priority over Daily Timer.

If Recording Timer is set to come on while Daily Timer is operating, Daily Timer is canceled and Recording Timer

start working.

AM 6:00 6:30	7:00	7:30
Recording Timer
Daily Timer
	canceled.

•If Sleep Timer overlaps with another timer (either Daily Timer or Recording Timer), a timer with the earlier shut-off

time has priority.

AM 6:00 6:30	7:00		7:30
Sleep Timer
Recording Timer		canceled.

When using the Recording Timer and Sleep Timer at the same time, pay special attention to the shut-off time.

25