JVC MX-GA8 manual Selecting the Sound Modes, Turning On or Off the Key-touch Tone, On the unit

English

Selecting the Sound Modes

This function only affects the playback sound, not your recording.

You can select one of the 6 preset sound modes (3 surround modes and 3 SEA—Sound Effect Amplifier—modes).

SOUND MODE control until the sound mode you want appears on the display.

When using the remote control, press SOUND MODE to select the sound mode.

• Each time you press the button, the sound modes change as follows:

D.CLUB HALL STADIUM ROCK

(Dance CLUB)

OFF CLASSIC POP

(Canceled)

When the sound mode is activated

Pressing SOUND TURBO cancels the sound mode (set to OFF).

SOUND MODE indicator also lights up on the display

•As you turn the control, the sound modes change as follows:

D.CLUB HALL STADIUMROCK

(Dance CLUB)

OFF CLASSIC POP

(Canceled)

Surround modes*:

D.CLUB : Increases resonance and bass.

HALL : Adds depth and brilliance to the sound.

STADIUM: Adds clarity and spreads the sound, like in an outdoor stadium.

SEA (Sound Effect Amplifier) modes:

ROCK : Boosts low and high frequency. Good for acoustic music.

POP : Good for vocal music.

CLASSIC : Good for classical music.

OFF : Cancels the sound mode.

*Surround elements are added to the SEA elements to create being-there feeling in your room.

When one of these modes is selected, the SOUND MODE

indicator lights up as SOUND .

MODE

While one of the SEA modes (SEA elements without surround elements) is selected, the SOUND MODE indicator lights up

as SOUNDMODE .

• The corresponding sound mode lamp also flashes.

D A N C E

When the sound mode is set to OFF

All sound mode indicators do not flash but light up.

Turning On or Off the Key-touch Tone

If you do not want the key-touch tone to beep each time you press a button or turn a control, you can deactivate it.

•You can turn on or off the key-touch tone as follows: –When the unit is off:

You can turn on or off the key-touch tone by operating the unit.

–When the unit is on:

You can turn on or off the key-touch tone by operating the unit or the remote control.

On the unit:

Press and hold BEEP for more than 2

BEEP

seconds.

•Each time you press and hold the button, the key-touch tone turns on and off alternately.

On the remote control:

Press BEEP ON/OFF when the unit is on.

•Each time you press the button, the key-touch tone turns on and off alternately.