Specialized Enduro 6, Demo 8 manual Tips

Page 13

TIPS

Front Derailleur Adjustment

CAUTION: Normally, the front derailleur cage is positioned 1-3 mm above the large (44t) outer chainring. When using an outer chainring (in place of a bash guard) the design of the Demo 8 & 9 requires that the front derailleur cage be positioned 3-5 mm above the outer chainring to prevent contact.

Saddle Adjustment

Although the Demo 7 & 8 are designed with sufficient clearance between the saddle, seat post and the rear wheel, in some geometry/saddle height combinations the rear wheel may contact the saddle or seatpost when the suspension is completely compressed or bottomed out.

Warning: If there is insufficient clearance between the rear wheel and the seat post and/or saddle, when the suspension is compressed the rear tire may come into contact with the seat post and/or saddle, which may cause you to lose control and fall. Fully compress the suspension before your first ride or after any adjustment, to make sure there is clearance between the rear wheel, the seat post and saddle.

13

Image 13
Contents Page Page Table of Contents Introduction Introduction Introduction Fork Compatibility Information Seat Post SetupDemo Frame Features Demo Frame Geometry Demo 8 Frame Geometry Frame SpecificationsDemo 7 Frame Geometry Shock Setup Tips Guard Pins Derailleur Guard InstallationDerailleur Guard Installation Schematic #19 Demo 7 /8 Bearing Kit SBC Limited Warranty Useful Product Life Cycle Page