DERAILLEUR GUARD INSTALLATION
Derailleur Guard Installation (Solid Axle option):
1.Install rear derailleur on derailleur hanger.
2.Place rear wheel in frame and install
3.Insert appropriate derailleur guard pin in derailleur.
4.Place guard sleeve in derailleur guard.
5.Slide derailleur guard and sleeve over guard pin and axle.
6.Install drive side nut and tighten hub to manufacturer specifications.
7.Torque guard pinch bolt to 80
31
25
10 | GUARD PINS |
Long (31mm):
All SRAM derailleurs
Medium (25mm):
Shimano XTR / XT / LX (All Shimano derailleurs with countersunk hanger bolt)
Short (10mm):
(All Shimano derailleurs without
countersunk hanger bolt)
15