DERAILLEUR GUARD INSTALLATION
The Specialized Derailleur guard comes with 05/06 Enduro 6” and Demo 8 models, and is available separately through your local Specialized dealer. The guard can be used in Q/R or solid axle setup, and is compatible with all Specialized Mountain bike models using the
Guard Part #:
Hanger Part #:
Derailleur Guard Installation (Q/R option):
1.Install rear derailleur on derailleur hanger.
2.Place rear wheel in frame and install Q/R, with springs and without Q/R end nut.
3.Insert appropriate derailleur guard pin in derailleur.
4.Place guard sleeve in derailleur guard.
5.Slide derailleur guard and sleeve over guard pin and Q/R.
6.Install supplied Q/R nut and tighten Q/R.
7.Torque guard pinch bolt to 80
31
25
10 | GUARD PINS |
Long (31mm):
All SRAM derailleurs
Medium (25mm):
Shimano XTR / XT / LX (All Shimano derailleurs with countersunk hanger bolt)
Short (10mm):
(All Shimano derailleurs without
countersunk hanger bolt)
14