Cadence (C)
Cadence is measured at the hub by analyzing the way a rider applies torque through the pedal stroke since there are natural power differences in the pedal stroke. The rate of pedaling is shown from 20 to 240 RPM.
NOTE: An optional wireless cadence sensor is available to measure cadence at the crank.
1) Press [MODE] to scroll the cursor to the bottom line of the main display.
FIGURE 18
365
25WATTS3
MI
C 89
2)Press [SELECT] to toggle through the
CYCLE COMPUTER MODE
Access to the Cycle Computer Mode is also gained in the cadence function. This fun- tion allows the PowerTap SL2.4 computer to function as a cycle computer in the absence of the PowerTap hub. This function is useful when the PowerTap SL2.4 hub is not present such as in racing situations where lighter racing wheels are used. NOTE: In Cycle Computer Mode heart rate is displayed in the top line of the main display and power data is no longer displayed. To enter Cycle Computer Mode:
1)Press [MODE] to scroll the cursor to the bottom line of the main display.
2)Press [SELECT] to toggle through the
3)Hold [SELECT] and the word “WATTS” will disappear from below the top line. Place magnet or rear wheel so it passes the receiver at the line or the sensor.
4)To return to current power function hold [SELECT] until the word “WATTS” is dis- played under the top line of the main display.
17