COMPUTER BATTERIES | FIGURE 29 |
The PowerTap SL2.4 has batteries in the hub and computer. Computer bat- |
|
teries typically need to be changed every 400 hours of use. The computer |
|
will also say “low bat” when the computer battery needs to be changed. This |
|
message is displayed after a “clr” is performed. To replace computer battery (Type CR2032), remove the computer from the mount. Remove the battery cover on the back of the computer (use a cone wrench to remove the bat- tery cover), exchange the battery, and replace the cover as shown below (FIGURE 29).
TECHNICAL SPECIFICATIONS |
|
Accuracy | |
Signal Transmission | 2.4 Ghz |
Interval Data Storage | Unlimited |
Interval Display | 9 Intervals (internal recording) |
Operational Temperature | 0 to 40 degrees c or 32 to 104 f |
Battery Life (Hub) | 300 hours approx. |
Battery Life (Console) | 400 hours approx. |
Battery Type (Hub) | Type 357 or EPX 76 (2 ea) |
Battery Type (CPU | ER2032 |
RANGE OF MEASUREMENT |
|
Power | |
Torque | |
Speed | |
Distance | 0.00 to 9999.99 (Miles) |
Trip Time | |
Cadence | |
Total energy | |
Odometer | |
Heart Rate |
34