Image IMTL30510.0 warranty Console Console Wire Tie

Page 10

8.Start an M5 x 16mm Screw (85) with an M5 Star Washer (7) into the Right Handrail (33), and then start two M4.2 x 19mm Screws (10) into the Right Handrail. Tighten the M5 x 16mm Screw and then tighten the two M4.2 x 19mm Screws; do not overtighten the Screws.

Attach the Left Handrail (not shown) to the Console Assembly (91) in the same way. Note: There are no wires on the left side.

9.Remove the ties from the Cage Nuts (103) in the Right Handrail (33) and the Left Handrail (not shown). If necessary, press the Cage Nuts back into place. With the help of a second person,hold the Console Assembly(91) near the Right Upright (54).

Connect the Wire Harness (39) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CON-

NECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Insert the connectors and the ex- cess wire downward into the Right Upright (54). Remove the wire tie from the Wire Harness.

8		85	10
	33	7	10
	33
	91
9
33		91
103		91	Console
103		Console Wire	Console
39		Console Wire	Wire
54		Wire	39
54		Tie	39

10

Image 10

Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. IMTL30510.0 Serial No On the WEBTable of Contents Important Precautions Page Before YOU Begin For your benefit, read this manual carefully beforeAssembly Hold the Left Upright 53 so that the small Make sure that the power cord is unpluggedOvertighten the Nuts the Wheels should turn Freely Holes are positioned as shown. Attach the LeftBolt yet Top ViewConsole Tie Wire Bracket Large Hole Small Wire Tie 103 Console Console Wire Tie Into the Uprights. Then, firmly tighten all four Bolts Knob Spring Collar Large Hole Pin HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Start the walking beltMeasure your heart rate if desired. Before using Follow your progress with the displays. The lower leftHOW to USE a Preset Workout Start the workoutInformation Mode HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Walking belt. If the walking belt has shifted toWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. IMTL30510.0 Key No. Qty DescriptionR0910A Exploded Drawing B-Model No. IMTL30510.0 Exploded Drawing C-Model No. IMTL30510.0 Exploded Drawing D-Model No. IMTL30510.0 Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT