Assembly
3.Slide the right upright onto the base frame. Secure the right upright to the base frame by using four bolts M10x25 and four washers 10.
Bolt M10x25
Washer 10
Figure 3: Right Upright Installation
4.Feed the console wire coming out of the console through the tube of the left handle- bar. Connect the EKG harness and the toggle harness coming from the handlebar to the EKG harness and the toggle harness coming from the console.
Secure the left and right handlebars to con- sole using two bolts M8x50 and two wash- ers M8 per side.
NOTE: Make sure not to pinch or screw through any wires when securing the left handlebar.
Bolt M8x50 |
| |
Console Harness | ||
| Washer M8 | |
EKG |
| |
Harness |
| |
Toggle |
| |
Harness | ||
Left Handlebar | Toggle | |
Harness | ||
| ||
| EKG | |
| Harness | |
| Right Handlebar | |