Image IMTL07905.0 user manual Troubleshooting, Problem The power turns off during use

Page 26

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call the toll-free telephone number on the front cover of this manual.

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 9). Use only a single-outlet surge suppressor

that meets all of the specifications described on page 9. Important: The treadmill is not compatible

with GFCI-equipped outlets.

 

 

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the reset/off circuit breaker located on the

c

 

treadmill frame near the power cord. If the switch

 

protrudes as shown, the circuit breaker has

 

 

tripped. To reset the circuit breaker, wait for five

Tripped

Reset

minutes, and then press the switch back in.

PROBLEM: The power turns off during use

 

 

SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key fully into the console. d. If the treadmill still will not run, see the front cover of this manual.

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re-

move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: The displays of the console do not function properly

 

 

 

SOLUTION: a. Remove the key from the console and UNPLUG THE

a

44

 

POWER CORD. With the help of a second person,

 

carefully tip the Uprights (97) down as shown. Remove

 

 

 

the five Hood Screws (44). Note: A phillips screwdriver

 

 

 

with at least a 5” shaft is required.

 

 

44

 

 

4497

 

 

 

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents QUESTIONS? Model No. IMTL07905.0 Serial NoTable of Contents Important Precautions Treadmill OperationInspect and properly tighten all parts Back Before YOU BeginRight Side Wire cutters AssemblyAssembly requires the included allen wrenches Make sure that the power cord is unplugged9980 107 Wire 108 Cylinder PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeTurn on the fan if desired When you are finished exercising, remove the keyMeasure your heart rate if desired HOW to USE a Preset Program Select one of the preset programsHOW to USE a Pulse Program Select a pulse programEnter a maximum speed setting Enter your ageSelect one of the custom programs HOW to USE a Custom Program Audio Y-adapter Cable Headphones HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Press the Play button on your CD player or VCRMeasure your heart rate if desired Directly from OUR WEB Site Follow the on-line instructions to start the programInformation MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop View Problem The walking belt slows when walked onThat the gap between the Magnet and the Reed Walking belt has shifted to the right, turnWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part LIST-Model No. IMTL07905.0 Key No. Qty DescriptionKey No. Qty. Description Exploded DRAWING-Model No Exploded Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT HOW to Order Replacement PartsLimited Warranty
Top Page Image Contents