Image IMTL12900 user manual Trouble-Shooting, Problem The power turns off during use

Page 25

TROUBLE-SHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 7). Use only a single-outlet surge suppressor that meets all of the specifications described on page 7. Important: The treadmill is not compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

d. Check the on/off switch located on the treadmill near the power cord. The switch must be in the on position.

PROBLEM: The power turns off during use

c

 

Tripped

Reset

d

 

On

 

Position

 

SOLUTION: a. Check the circuit breaker located on the treadmill near the power cord (see c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in.

c. Remove the key from the console. Reinsert the key fully into the console.

d. Make sure that the on/off switch is in the on position (see d. above).

e. If the treadmill still will not run, please call our Customer Service Department, toll-free.

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

3”–4”

Rear Roller Bolts

c. If the walking belt still slows when walked on, please call our Customer Service Department, toll- free.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents
Model No. IMTL12900 Serial No QUESTIONS?Customer HOT Line Important Precautions Table of ContentsQty Description R0302ASuggested Stretches Assembly HOW to PUT on the Heart Rate Monitor HOW to USE the Heart Rate MonitorHeart Rate Monitor Care and Maintenance Heart Rate Monitor TROUBLE-SHOOTINGHOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Features of the Console Diagram of the ConsoleDiagram of the Console HOW to USE the Manual Mode HOW to Turn on the PowerDistance/Incline Laps display-This Adjust the speed and incline of the treadmillSpeed/Minutes-Mile display-This display Time/Segment Time display-WhenSelect one of the performance programs HOW to USE Performance ProgramsPress the Start button to start the program Follow your progress with the five displays HOW to USE Pulse ProgramsRemove the key from the console Select one of the pulse programsPress the Start button Put on the heart rate monitorSelect one of the custom programs HOW to Create a Custom ProgramHOW to USE a Custom Program HOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoAudio Adapter Cable HOW to Connect Your VCRPressVCR. the Play button on your CD player or See on When the program is finished, remove the key HOW to USE Programs Directly from OUR Internet Site Follow the on-line instructions to start the program Optional Hand Weights Information MODE/DEMO ModeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TROUBLE-SHOOTINGProblem The walking belt slows when walked on Top Problem The heart rate monitor does not function properly Exercise Intensity Conditioning GuidelinesWorkout Guidelines Before YOU Begin Page Ordering Replacement Parts Limited Warranty IMTL12900 No. IMTL12900
Top Page Image Contents