PART | R0102A |
Note: To identify the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.
Key No. | Qty. | Description | Key No. | Qty. | Description |
1 | 2 | Foot Rail Insert | 51 | 1 | Chest Pulse Strap |
2 | 1 | Right Foot Rail | 52 | 4 | Roller Adj. Washer |
3 | 4 | Nylon Washer | 53 | 2 | Rear Roller Adjustment Bolt |
4 | 4 | Isolator | 54 | 1 | Rear Endcap |
5 | 1 | Latch Catch | 55 | 1 | Frame |
6 | 1 | Platform | 56 | 1 | Allen Wrench |
7 | 4 | Walking Deck Screw | 57 | 2 | Rear Platform Screw |
8 | 1 | Walking Belt | 58 | 1 | Rear Roller |
9 | 2 | Frame Pivot Bolt | 59 | 2 | Left Upright Cover |
10 | 2 | Frame Pivot Washer | 60 | 2 | Right Upright Cover |
11 | 1 | Front Wheel/Pulley | 61 | 6 | Upright Cover Screw |
12 | 1 | Magnet | 62 | 1 | Left Foam Grip |
13 | 2 | Front Roller Nut | 63 | 1 | Handrail Endcap |
14 | 2 | Spacer Insert | 64 | 1 | Pulse Sensor |
15 | 2 | Frame Pivot Spacer | 65 | 1 | Upright |
16 | 1 | Reed Switch Clip | 66** | 2 | |
17 | 1 | Reed Switch | 67 | 1 | Lock Knob |
18 | 1 | Lift Frame | 68 | 1 | Lock Knob Sleeve |
19 | 4 | Clips | 69 | 1 | Lock Knob Spring |
20 | 4 | Motor Nut | 70 | 1 | Lock Pin Collar |
21 | 1 | Left Foot Rail Endcap | 71 | 1 | Pin Clip |
22 | 1 | Motor Belt | 72 | 1 | Lock Pin |
23 | 1 | Pulley/Flywheel/Fan | 73 | 2 | Incline Pivot Bolt |
24 | 1 | Motor | 74 | 4 | Metal Motor Washer |
25 | 1 | Motor Tension Nut | 75 | 7 | Console Screw (long) |
26 | 22 | Screw | 76 | 2 | Wheel Spacer |
27 | 4 | Hood Bracket | 77 | 2 | Front Wheel |
28 | 1 | Motor Tension Bolt | 78 | 2 | Wheel Bolt |
29 | 1 | Motor Tension Washer | 79 | 1 | Right Foam Grip |
30 | 4 | Lift Motor Nut/Pivot Nut | 80 | 1 | Console Base (Top) |
31 | 1 | Lift Motor Bolt | 81 | 1 | Console |
32 | 4 | Motor Bolt | 82 | 1 | Key/Clip |
33 | 1 | Outlet Bracket | 83 | 1 | Console Base (Bottom) |
34 | 4 | Plastic | 84 | 1 | Left Foot Rail |
35 | 1 | Power Supply | 85 | 1 | Upright Wire Harness |
36 | 1 | Power Supply Bracket | 86 | 1 | Shock |
37 | 1 | Controller | 87 | 1 | Upright Endcap |
38 | 1 | Controller Bracket | 88* | 1 | Motor/Pulley/Flywheel/Fan |
39 | 1 | Motor Hood | 89 | 1 | Right Foot Rail Endcap |
40 | 18 | Hood Screw | 90 | 1 | Latch Warning Decal |
41 | 1 | Motor Belly Pan | 91 | 1 | Incline Motor |
42 | 2 | Belt Guide | 92 | 1 | 12” Wire Harness |
43 | 4 | Belt Guide Screw | 93 | 2 | Incline Motor Spacer |
44 | 13 | Plastic Fastener | 94 | 1 | Tie Holder Screw |
45 | 1 | Frame Belly Pan | 95 | 2 | Tie Holder |
46 | 1 | 12” Audio Wire | 96 | 1 | Tie |
47 | 1 | Ground Screw | 97 | 5 | 8” Cable Tie |
48 | 2 | Rear Foot | 98 | 2 | Bumper |
49 | 4 | Isolator Washer | 99 | 8 | Bumper Screw/Base Screw |
50 | 4 | Isolator Nut | 100 | 1 | On/Off Switch |
26