HOW TO USE IFIT.COM CD AND VIDEO PROGRAMS
To use iFIT.com CDs or videocassettes, the treadmill must be connected to your portable CD player, portable stereo, home stereo, computer with CD player, or VCR. See HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER on page
15.Note: IFIT.com CD and video programs will con- trol only the speed of your treadmill.
To purchase iFIT.com CDs or videocassettes, call
Follow the steps below to use an iFIT.com CD or video program.
1 Insert the key into the console.
See HOW TO TURN ON THE POWER on page 12.
2 Select the iFIT.com mode. When the key is in-
serted, the manual mode will be selected. To use iFIT.com CDs or videocassettes, press the iFIT.com but-
ton. The indicator above the button will light.
3 Insert the iFIT.com CD or videocassette.
If you are using an iFIT.com CD, insert the CD into your CD player. If you are using an iFIT.com videocassette, insert the videocassette into your VCR.
4 Press the PLAY button on your CD player or VCR .
A moment after the button is pressed, your per- sonal trainer will begin guiding you through your workout. Simply follow your personal trainer’s instructions. Note: If the Calories/Time display is flashing, press the Start button or the Speed ▲ button on the console. The treadmill will not re- spond to a CD or video program when the Calories/Time display is flashing.
During the CD or video program, an electronic “chirping” sound will alert you when the speed of the treadmill is about to change. CAUTION:
Always listen for the “chirp” and be prepared for speed changes. In some instances, the speed may change before the personal trainer describes the change.
If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change t o the next settings of the CD or video program.
To stop the walking belt at any time, press the Stop button on the console. The Calories/Time display will begin to flash. To restart the program, press the Start button or the Speed ▲ button. After a moment, the walking belt will begin to move.
When the next “chirp” is heard, the speed will change to the next setting of the CD or video program.
When the CD or video program is completed, the walking belt will stop and the Calories/Time display will begin to flash. Note: To use another CD or video program, press the Stop button or remove the key and go to step 1.
Note: If the speed or incline of the treadmill does not change when a “chirp” is heard:
•Make sure that the iFIT.com indicator is lit and that the Calories/Time display is not flashing. If the Calories/Time display is flashing, press the Start button or the Speed ▲ button on the console.
•Adjust the volume of your CD player or VCR. If the volume is too high or too low, the con- sole may not detect the program signals.
•Make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord.
5 Follow your progress with the matrix and the displays .
See step 5 on page 12.
6 Measure your heart rate, if desired.
See step 6 on page 13.
7 Whenkey. the program is completed, remove the
See step 7 on page 14.
CAUTION: Always remove iFIT.com CDs and videocassettes from your CD player or VCR when you are finished using them.
18