Using the CD Player
6Press the SET button.
Program order number
UP
SET | (After 2 seconds) |
DOWN
Total playback time of the programmed tracks
7Repeat steps 5 and 6 to select the other tracks for the program.
You can see the total playback time of programmed tracks on the display. Also, you can see the programmed tracks on the music calendar.
8Press the CD #/8 button.
The System plays the tracks in the order you have pro- grammed them.
■You can skip to a particular program track by pressing the 4 or ¢ button during Program Play.
■To stop playing, press the 7 button once.
To confirm the programmed tracks while the CD player is stopped, each time press the 4 or ¢ but- ton; the tracks making up the program will successively be displayed in the programmed order.
To delete all the tracks in the program, in stop mode, press the 7 button. Pressing the CD 0 button to open the Top Cover will also clear the programmed tracks.
To exit the program mode once, while the CD Player is stopped, press the PROGRAM button to light off the “PROGRAM” indicator.
•If the total playback time of the programmed tracks ex- ceeds 99 minutes 59 seconds, the total playback time will go out on the display.
•If you try to program the 33rd track, “MEMORY FULL” ap- pears on the display for about 2 seconds.
To Modify the Program
Modify the contents of the program while the CD Player is stopped.
Each time you press the CANCEL button, the last track in the program is deleted. To add new tracks to the end of the program, repeat above steps 5 to 7.
Random Play
The tracks will play in no special order when you use this mode.
1Press the RANDOM button on the Remote Control.
The “RANDOM” indicator lights up on the display.
2Press the CD #/8 button.
The tracks are played in random order.
To skip a track during playback, press the ¢ button to jump to the next track in the random sequence. Press the
4button to jump back to the start of a track being played.
To exit Random Play mode, while the CD Player is stopped, press the RANDOM button to light off the “RAN- DOM” indicator and carry out Normal Play, or press the CD 0 button to open the Top Cover.
Repeating Tracks
You can repeat all tracks or individual track, as many times as you like.
Press the REPEAT button on the Remote Control. The Repeat indicator changes with each press of the button, as shown below.
= 
ALL=blank display = (back to the beginning)
: Repeats one track.
ALL: In Normal Play mode, repeats all the tracks. In Program Play mode, repeats all the tracks in the program.
In Random Play mode, repeats all the tracks in random order.
To exit Repeat mode, press the REPEAT button until the Repeat indicator on the display goes out.
■In Random Play, 
cannot be selected.
■Repeat mode remains in effect even when you change the play mode.
15