JVC FS-SD990, FS-SD550 manual Connecting the Speakers, Removing the speaker grilles, When removing

Page 8

Getting Started

CAUTION:

• Make all connections before plugging the System into an AC power outlet.

Connecting the Speakers

1.Open each of the terminals to connect the speaker wire leads.

2.Connect the speaker cords between the Speaker terminals of the Unit and the terminals of the Speakers. Connect the cords with a black line to the (–) terminals and cords without a black line to the (+) terminals.

3.Close each of the terminals to securely connect the cords.

Right side (rear view)

Left side (rear view)

Marked with a black line

SPEAKERS IMPEDANCE 416

R

L

• Since both speakers are the same, you can put either one to the right or left side.

CAUTION:

•A TV may display irregular colors if located near the speakers. If this happens, set the speak- ers away from the TV.

Removing the speaker grilles

The speaker grilles can be moved.

When removing:

1.Pull the top forwards you with your fingers.

2.Also pull the bottom towords you.

•When removing the speaker grille from the FS- SD990’s speaker, be careful not to damage the cab- inet.

When attaching the speaker grille:

(FS-SD550) (FS-SD770 and FS-SD990)

(FS-SD550) (FS-SD770 and FS-SD990)

Speaker	Speaker
grille	Speaker
	grille

6

Image 8

Contents FS-SD550/FS-SD770/FS-SD990 For U.S.A Class 1 Laser ProductFeatures Installation of the SystemIntroduction How This Manual Is OrganizedTable of Contents Accessories How To Put Batteries In the Remote ControlUsing the Remote Control Getting StartedConnecting the FM Antenna Using the Supplied Wire AntennaUsing the Coaxial Type Connector Not Supplied Rear Panel of the UnitConnecting the AM Antenna AM loop antenna SuppliedConnecting the Speakers When removingWhen attaching the speaker grille Removing the speaker grillesConnecting an MD Recorder, etc Digital Output Connecting a SubwooferConnecting External Equipment Connecting the AC Power Cord Automatic Power OnOn the Remote Control Compu PlayTurning the Power On and Off Adjusting the Brightness DimmerAdjusting the Volume Basic OperationsFade-out Muting Fade Muting Showing the Time CLOCK/DISPLAYReinforcing the Bass Sound AHB PRO Tone Control BASS/TREBLEUsing the Tuner Tuning In a StationSelect a station using one of the follow- ing methods One Touch RadioPresetting Stations Auto PresettingManual Presetting To Change the FM Reception ModeUsing the CD Player When playing a CD-R or CD-RWTo Insert a CD Quickest Way To Start a CD Is With the One Touch OperationBasics of Using CD Player-Normal Play To Unload a CDTo Play a CD Search PlayPress the Random button on the Remote Control To Modify the ProgramRandom Play Repeating TracksUsing External Equipments Set the Volume control to the mini- mum positionListening to External Equipment Recording the System’s Source to External EquipmentUsing the Timers Setting the ClockSetting the Daily Timer Press the Power buttonSetting the on time Example AM Play a CD or tune in to the desired sta- tion Setting the Sleep TimerPress the Sleep button on the Remote Control Care And Maintenance Troubleshooting SymptomPossible Cause ActionSpecifications Qualityservice Factory Service Center LocationsLimited Warranty AUDIO-1 0201MZMCREHIT