Using the Timers
SLEEP
REMOTE CONTROL |
| |
DIMMER | SLEEP | POWER |
DISPLAY | AUTO | FM MODE |
PRESET | ||
PROGRAM RANDOM | REPEAT | |
AHB PRO | DOOR | CD |
SLIDE | ||
BASS | TREBLE | CANCEL |
UP
SET
DOWN
FADE MUTING
CD
MD/AUX 
FM/AM
VOLUME
|
| PRESET |
|
|
MD/AUX | FM/AM | TUNING AHB PRO | CLOCK TIMER | VOLUME |
|
|
| CD |
|
|
| DOWN | UP |
|
|
|
| MULTI CONTROL |
|
|
|
|
| TIMER |
|
| 4 | ¢ CLOCK | |
ON time, OFF time,
Source, Volume
Timer indicator
SLEEP 
SLEEP indicator
*When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.
The timers let you control listening functions automatically.
Setting the Clock
•Use the Unit’s button to set the clock.
•When you plug the AC power cord into the wall outlet, the time indication “AM 12:00” blinks on the display.
•The clock must be correctly set for the timers to work.
•The procedure must be completed within two minutes. Otherwise, the setting is cleared and must be repeated from the beginning.
1Press the POWER button.
Then, the Unit’s top buttons appear.
5Press the ¢ or 4 button to set the minute.
6Press the CLOCK button.
The selected time is set and the seconds start counting from 0.
CAUTION:
•If there is a power failure, the clock loses its setting after about 20 minutes. “AM 12:00” blinks on the display and the clock must be reset.
•The clock may gain or lose one to two minutes per month.
CLOCK | CLOCK |
| CD |
DOWN | UP |
| MULTI CONTROL |
(for 2 seconds)
2Press the CLOCK button on the Unit for more than two seconds.
The hour digit of the time indication rapidly blinks on the display.
3Press the ¢ or 4 button on the Unit to set the hour.
Pressing the ¢ button moves the time forwards and pressing the 4 button moves it backwards. Hold down the button to move the time rapidly.
Setting the Daily Timer
Once you have set the Daily Timer, the timer will be acti- vated at the same time every day.
The Timer indicator on the display shows that the Daily Timer you have set is in effect.
•Use the Unit’s button to set the timer.
•Perform each setting within 30 seconds. Otherwise, set- ting will be cleared and the procedure must be repeated from the beginning.
4Press the CLOCK button.
The minute digits of the time indication rapidly blink on the display.
17