NordicTrack NTTL11512 manual Measure your heart rate, if desired

Page 19

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program.

To stop the walking belt at any time, press the Stop button on the console. The Time/Laps dis- play will begin to flash. To restart the program, press the Start button or the Speed + button. After a moment, the walking belt will begin to move at

1.0mph. When the next “chirp” is heard, the speed and incline will change to the next set- tings of the CD or video program.

When the CD or video program is completed, the walking belt will stop and the Time/Laps display will begin to flash. Note: To use another CD or video program, press the Stop button or remove the key and go to step 1 on page 18.

Note: If the speed or incline of the treadmill does not change when a “chirp” is heard:

Make sure that the iFIT.com indicator is lit and that the Time/Laps display is not flashing. If the Time/Laps display is flashing, press the Start button or the Speed + button on the console.

Adjust the volume of your CD player or VCR. If the volume is too high or too low, the con- sole may not detect the program signals.

Make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord.

If you are using your portable CD player and the CD skips, set the CD player on the floor or another flat surface instead of on the console.

See the bottom of page 24.

5 Follow your progress with the LED track and the displays.

See step 5 on page 11.

6 Measure your heart rate, if desired.

Refer to step 6 on page 12.

7 Whenkey. the program is completed, remove the

See step 6 on page 13.

CAUTION: Always remove iFIT.com CDs and videocassettes from your CD player or VCR when you are finished using them.

19

Image 19 Contents
Model No. NTTL11512 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Right Side Before YOU BeginLeft Side Key/ClipExtension Legs 88 remain in the Uprights AssemblyHandrail Bolts Tighten all four Handrail Bolts. Press an Upright Tighten the Bolts yetHOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Features of the Console Getting Started HOW to USE the Manual Mode Measure your heart rate, if desired HOW to USE Preset ProgramsSelect one of the three preset programs Speed/Pace displayFollow your progress with the displays When the program has ended, remove the keySelect one of the custom programs HOW to Create Custom ProgramsHOW to USE Custom Programs HOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoAudio Adapter Cable HOW to Connect Your VCRPressVCR. the Play button on your CD player or Whenkey. the program is completed, remove Follow the on-line instructions to start the program HOW to USE Programs Directly from OUR WEB SiteOptional Hand Weights Information MODE/DEMO ModeOptional Chest Pulse Sensor HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillProblem The power turns off during use TROUBLE-SHOOTINGTop Problem The walking belt slows when walked on Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesQty Description R0102AOrdering Replacement Parts R0102A Model No Limited Warranty