THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the information mode allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console. When the information mode is selected, the main display will show the following information:
This section of the main display will show the total number of miles that the walking belt has moved.
This section of the main display will show the total number of hours that the treadmill has been used.
An “E” for English miles or an “M” for metric kilometers will appear on the right side of the main display. Press the Speed + button to change the unit of measure- ment.
IMPORTANT: Make sure that there is not a letter
“D” in the main display. If a “D” appears in the display,
the console is in the “demo” mode. This mode is intended
to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence, although the buttons on the console will not operate. If a “D” ap- pears in the display when the information mode is selected, press the Speed – button so the display is blank.
To exit the information mode, remove the key from the console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor adds even more features to the console. The chest pulse sensor provides
THE OPTIONAL iFIT.COM MODULE
By adding an optional iFIT.com module to the treadmill, you can use vir- tually endless features from our internet site. Imagine
and the ability to use your computer to track your work- outs. For information about purchasing the optional iFIT.com module, call
24