NordicTrack NTTL10610 specification

4.Slide the Grounding Bracket (107) onto one of the Handrail Spacers (65) in the location shown.

See inset drawing A. Pinch the tabs on the Grounding Bracket (107) so that the tabs will fit into the hole in the Upright (69 [see inset drawing B]).

See inset drawing B. Place the Handrail Spacer (65) on the left Upright (69) as shown, with the cutout on the in- dicated side. Note: Make sure that the tabs on the Grounding Bracket (107 [see inset drawing B]) are in- serted into the hole in the Upright.

5.Pull the Upright Wire Harness (98) up through the other Handrail Spacer (65). Place the Handrail Spacer on the right Upright (69) as shown, with the cutout turned toward the treadmill (see inset drawing A).

Have a second person hold the Handrails (66) near the Uprights (69) as shown. Connect the Upright Wire Harness (98) to the wires extending from the Console Base (81). Insert the connectors and the Upright Wire Harness into the hole in the Console Base (see inset drawing B).

Set the Handrails (66) on the Handrail Spacers (65), being careful not to pinch the Upright Wire Harness (98).

6.Insert two Handrail Bolts (78) with Handrail Washers (77) and Handrail Bushings (75) into the right Upright (69) and the right Handrail Spacer (65). Turn the Handrail Bushings so they fit against the Upright with the thick sides of the Bushings toward the center of the treadmill as shown in the inset drawing. Lift the right Handrail (66) slightly and align the Bolts with the holes in the Handrail. Next, thread the Bolts into the Handrail. Do not tighten the Bolts yet.

Attach the left Handrail (not shown) in the same way. Tighten all four Handrail Bolts (78).

4	107	65		A	Tabs
	107	65			Tabs
				107
B
					Cutout
	65					69
	65
5				A
		81		Cutout
		81
				65
			66
						69
		98	69	B	98
	65
						81
6
				66
				65
				69
				75
					77	Thick
					77	Side
						Side
		75	77		78
			77		78

7.Make sure that all parts are tightened before you use the treadmill. Note: If there is a thin sheet of clear plastic on the hood decal, remove it. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 27). To protect the floor or carpet from damage, place a mat under the treadmill.

NTTL10610 specifications

The NordicTrack NTTL10610, also known as the Commercial Series treadmill, is a high-performance piece of equipment designed for fitness enthusiasts who seek a robust workout experience. This treadmill is equipped with a range of features that enhance user engagement and workout efficiency, making it a popular choice among home gym setups.

One of the standout features of the NordicTrack NTTL10610 is its powerful 3.5 CHP motor, which ensures smooth and quiet operation. This heavy-duty motor can handle intense workouts and provides a consistent performance, allowing users to run or walk at various speeds without any lag. The treadmill reaches speeds of up to 12 mph and can incline up to 15 percent, enabling users to simulate challenging terrains and maximize their cardiovascular workouts.

The 22-inch full-color touchscreen display is another significant highlight, providing an intuitive interface for navigating workout programs, tracking performance metrics, and adjusting settings. With access to the iFit membership, users can explore a vast library of on-demand workouts led by professional trainers, participate in daily challenges, and even simulate outdoor runs in different environments thanks to the Google Maps integration.

The treadmill features a spacious running surface of 60 inches in length, which accommodates users of all sizes and allows for a comfortable stride. The FlexSelect cushioning system is designed to reduce impact on joints, enhancing comfort during workouts and minimizing the risk of injury. Users can easily adjust the cushioning to suit their preference, whether they prefer a softer surface or a firmer feel.

For added convenience, the NordicTrack NTTL10610 includes built-in Bluetooth speakers, allowing users to stream music or audio from their devices during workouts. Additionally, it features integrated Wi-Fi connectivity, enabling users to stay connected and access their favorite apps while exercising.

Other characteristics include a sturdy frame design, easy-fold technology for space-saving storage, and a variety of safety features such as an emergency stop switch. Overall, the NordicTrack NTTL10610 is an advanced treadmill offering a combination of technology, performance, and user-friendly features, making it an excellent investment for achieving fitness goals in the comfort of home.