4.Identify the right Handrail (86) and the Left Handrail (89); the Handrails have indented holes in the outer sides for the heads of the Handrail Bolts (90).
Hold the Right Handrail (86) on the right side of the tread- mill. Loosely thread two Handrail Bolts (90) into the bracket on the Right Handrail and into the console assem- bly. Do not tighten the Handrail Bolts yet. Attach the Left Handrail to the left side of the treadmill in the same way. Then, slide the Upper Handrail (93) onto the Right and Left Handrails.
Next, slide a Handrail Bracket (32) onto the lower end of the Right Handrail (86). Insert two Handrail Bracket Bolts (31) with two Washers (116) into the Right Handrail and the Handrail Bracket, and finger tighten the Handrail Bracket Bolts into the Frame (28). Do not tighten the Handrail Bracket Bolts yet. Attach the lower end of the Left Handrail (89) in the same way.
5.Attach the Upper Handrail (93) to the Left and Right Handrails (86, 89) with four 3/4” Tek Screws (91) (only two are shown); start all four Tek Screws before tightening them.
See step 4. Firmly tighten the four Handrail Bolts (90) and the four Handrail Bracket Bolts (31).
4 | 93 |
| |
89 |
|
Console |
|
Assembly |
|
86 | 90 |
| |
| 116 |
32 | 31 |
| |
28 |
|
5 |
|
93 |
|
89 |
|
| 91 |
86 |
|
9