NordicTrack NTL10841 Uprights. Be careful not to pinch the wires, Tighten the four 4 1/2 Bolts

Page 7

3. Cut the rubber band holding the Upright Wire Harness

3

 

 

98

(98). Have a second person hold the console assembly

 

 

 

 

 

 

 

 

 

near the Uprights (69). Connect the Upright Wire Harness

 

 

81

 

to the wires extending from the Console Base (81). The

 

 

 

connectors should slide together easily and snap into

 

 

 

 

place. If they do not, turn one connector and try again.

 

 

 

 

Insert the connectors and the Upright Wire Harness into

 

98

 

 

the right Upright, and then set the console assembly on

 

 

 

 

the Uprights. Be careful not to pinch the wires.

 

 

 

 

 

 

 

69

 

 

Console

 

 

 

 

Assembly

 

 

 

4. Insert a Handrail (118) into the right side of the console

4

 

 

 

assembly as shown; you may need to twist the Handrail

 

 

 

 

 

 

 

as you insert it. Next, insert two 4 1/2” Bolts (78) with

 

 

 

 

Handrail Bushings (77) into the right Upright (69) and the

 

 

 

 

Handrail. Be careful not to pinch the wires. Make sure

 

 

 

 

that the Handrail Bushings are flush against the right

 

 

 

 

Upright, with the thicker sides facing the center of the

 

 

69

 

treadmill, as shown in the inset drawing.

 

 

Thick

 

 

77

 

 

 

Next, lift the console assembly and the Handrail (118)

 

 

 

Side

118

 

 

 

slightly and align the 4 1/2” Bolts (78) with the holes in the

 

 

 

 

 

 

 

Handrail. Thread the Bolts into the Upright (69) and the

 

 

 

 

Handrail until the heads of the Bolts are against the

 

77

78

 

Upright. Do not tighten the Bolts yet.

 

 

 

Console

 

 

 

 

 

 

Attach the other Handrail (not shown) in the same way.

 

Assembly

 

 

Note: There are no wires on the left side.

 

 

 

 

5. With the help of a second person, carefully tip the

5

 

 

 

Uprights (69) down to the position shown. Make sure that

 

 

 

 

 

 

99

the Extension Legs (102) remain in the Uprights.

 

 

 

 

 

 

 

Attach each Extension Leg (102) with two 1” Tek Screws

69

 

 

53

 

 

 

(47) and a Base Pad (99) as shown. (Note: Attach the

 

 

 

 

lower Screw [without the Base Pad] first.) Next, align the

 

 

 

99

lower ends of the Handrails (118) with the holes in the

 

 

 

 

 

 

47

base of the Uprights (69). Attach each Handrail with a 4”

 

99

 

 

 

 

Bolt (53) as shown. Note: The Bolts must be at an

 

 

102

99

angle that matches the angle of the Handrails as

 

53

 

 

 

 

shown in the inset drawing.

 

 

 

 

 

 

 

With the help of a second person, carefully tip the

118

99

 

 

47

 

 

Uprights (69) back to the vertical position. See step 4.

 

 

53

 

 

 

Tighten the four 4 1/2” Bolts (78).

102

 

 

99

 

 

 

 

 

 

Note: A replacement Base Pad (99) may be included. Use

 

 

118

 

the Base Pad to replace any Base Pad that becomes worn.

 

 

 

 

6.Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 26). To protect the floor or carpet from damage, place a mat under the treadmill.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model No. NTL10841 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Right Side Before YOU BeginAssembly Extension Legs 102 remain in the Uprights Uprights. Be careful not to pinch the wiresHandrail. Be careful not to pinch the wires. Make sure Upright. Do not tighten the Bolts yetPLS2 HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerIncline/Distance Change the incline of the treadmill as desiredFollow your progress with the displays Program display-When Training Zone display-As you exerSelect one of the four preset programs HOW to USE Preset ProgramsTurn on the fans if desired Whenkey. you are finished exercising, remove Follow your progress with the displaysSelect one of the custom programs HOW to Create Custom ProgramsTurn on the fan if desired HOW to USE Custom ProgramsHOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoHOW to Connect Your VCR When the program has ended, remove the key Follow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteReturn to the treadmill and stand on the foot Optional Chest Pulse Sensor Information MODE/DEMO ModeHOW to USE the Aromatherapy System Rejuvenaire scents and scent pads, call toll-freeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop View Problem The walking belt slows when walked on Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Page Qty Description R1103AOrdering Replacement Parts Exploded DRAWING-Model No. NTL10841 115 108 107 116 117 104 102 106 103 119 118 Limited Warranty

NTL10841 specifications

The NordicTrack NTL10841 is a treadmill designed for fitness enthusiasts seeking an advanced and versatile workout experience. Known for its robust build and array of features, this equipment aims to bring the gym experience into your home.

One of the standout features of the NTL10841 is its 10-inch smart touchscreen display. This vibrant display not only provides clear visibility of workout metrics but also offers access to iFit technology. With iFit, users can enjoy thousands of on-demand workouts led by certified trainers, covering various training styles from high-intensity interval training to endurance runs. Users can even simulate outdoor runs with Google Maps, providing a realistic running experience without leaving the comfort of home.

The NTL10841 treadmill also comes with a powerful motor designed for smooth and consistent performance. Its incline capability allows users to vary their workouts, making them more challenging and effective. The incline feature often ranges up to 12 percent, enabling runners to mimic hill training. Additionally, the decline option enhances this functionality by allowing users to train on a downward slope, giving a more dynamic workout.

In terms of design, the NTL10841 features a spacious running surface that measures 20 inches by 60 inches, accommodating users of various heights and stride lengths. The FlexSelect cushioning system is another significant characteristic, allowing users to customize the treadmill's impact on their joints—choosing between a cushioned surface for joint protection and a firmer deck for a more road-like experience.

Safety is also a priority with the NordicTrack NTL10841. An easy-to-reach safety key ensures that the treadmill stops immediately in case of an emergency. Furthermore, the treadmill is equipped with built-in speakers and Bluetooth connectivity, allowing users to listen to music or podcasts while they run, enhancing their overall workout experience.

With its sturdy construction and variety of features, the NordicTrack NTL10841 is ideal for all levels of fitness enthusiasts. Whether training for a race or maintaining overall health, users will appreciate the combination of technology and performance in this treadmill. Overall, the NTL10841 stands out as a reliable and feature-packed machine that can help users achieve their fitness goals effectively.
Top Page Image Contents