NordicTrack NTL15940 user manual Follow your progress with the displays

Page 14

If the speed or incline setting is too high or too low during the program, you can manually override the setting by pressing the Speed or Incline but- tons on the console. Every few times one of the Speed buttons is pressed, an additional indicator will light or darken in the Current Segment column. (If any of the columns to the right of the Current Segment column have the same number of lit indi- cators as the Current Segment column, an addi- tional indicator may light or darken in those columns as well.) Note: If you manually adjust the speed setting so that all of the indicators in the Current Segment column are lit, the speed settings in the program display will not move downward as described above. Note: If you manually override the speed or incline setting, when the next seg- ment begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.

To stop the program temporarily, press the Stop button. The time will begin to flash in the main dis- play. To restart the program, press the Start button or the Speed + button. The walking belt will begin to move at 1 mph. When the next segment begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. To end the program, press the Stop button, remove the key, and then reinsert the key.

4 Follow your progress with the displays.

See step 5 on page 11.

5 Measure your heart rate if desired.

See step 6 on page 12.

6 Turn on the fans if desired.

See step 7 on page 12.

7 Whenkey. you are finished exercising, remove the

Step onto the foot rails and make sure that the in- cline of the treadmill is at the lowest level. Next, remove the key from the console and put it in a se- cure place. Note: If the displays and indicators on the console remain lit after the key is re- moved, the console is in the “demo” mode. See page 24 and turn off the demo mode.

When you are finished using the treadmill, move the on/off circuit breaker switch near the power cord to the off position and unplug the power cord.

14

Image 14
Contents Customer HOT Line QUESTIONS?Model No. NTL15940 Serial No Table of Contents Important Precautions Page Right Side Before YOU BeginLeft Side Assembly Extension Legs 102 remain in the UprightsConsole Assembly Performant Lubetm Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Getting Started Start the walking belt HOW to USE the Manual ModeSelect the manual mode Change the incline of 4 the treadmill as de- siredMeasure your heart rate if desired Distance/Laps-TheCalories/Pulse-When Turn on the fans if desiredHOW to USE Preset Programs Select the desired preset programFollow your progress with the displays Whenkey. you are finished exercising, removeSelect one of the custom programs HOW to Create Custom ProgramsDefined, one to three columns of indicators To USE Custom Programs onHOW to USE Custom Programs HOW to USE Heart Rate Programs Follow your progress with the displays HOW to Connect Your Portable CD Player HOW to Connect Your Home Stereo HOW to Connect Your ComputerPressVCR. the Play button on your CD player or HOW to Connect Your VCRAudio Adapter Cable Measure your heart rate if desired Return to the treadmill and stand on the foot HOW to USE Programs Directly from OUR WEB SiteFollow the on-line instructions to start Program Rejuvenaire scents and scent pads, call toll-free Information MODE/DEMO ModeHOW to USE the Aromatherapy System Optional Chest Pulse SensorPLS2 HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETop TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyR1203A Key Qty. DescriptionOrdering Replacement Parts Part Identification ChartExploded DRAWING-Model No. NTL15940 Exploded Limited Warranty