NordicTrack NTL12951 user manual Wire

Page 10

11.Remove the knob from the pin. Make sure that the collar and the spring are on the pin.

Press the Latch Insert (77) into the left side of the Uprights (85) as shown. Use a rubber mallet if necessary. Insert the pin into the Latch Insert. Tighten the knob back onto the pin.

11

 

Knob

 

 

77

 

Spring

 

Collar

85

Pin

 

12.Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 31). To protect the floor or carpet from damage, place a mat under the treadmill.

If you purchase the optional chest pulse sensor (see page 27) after the treadmill is assembled, follow the steps below to install the receiver included with the chest pulse sensor.

1.Make sure that the power cord is unplugged. Follow assemble steps 8 to 10 in reverse order (begin with step 10).

2.Lift the left side of the console assembly. Be careful not to pull any wires. Remove the indicated 3/4” Screw (7) and the Access Door (95) from the left side of the Console Back (96).

3.Connect the wire on the receiver (A) to the indicated wire extending from the Console Back (96). Hold the re- ceiver so the small cylinder is oriented as shown and is facing the Console Back. Attach the receiver to the plastic posts on the Access Door (95) with the two in- cluded small screws.

4.Make sure that no wires are pinched. Reattach the Access Door (95) with the 3/4” Screw (7). Discard the other wires included with the receiver.

 

 

Small

 

 

Screws

 

 

96

95

 

Wire

 

 

A

 

7

Small

 

Cylinder

 

 

5. Repeat assembly steps 8 to 10.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model No. NTL12951 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the Base Extension 90 remains in the Uprights Do not tip the Frame forward past the vertical posi- tionPage Page Wire HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeFollow your progress with the display Turn on the fans if desired Measure your heart rate if desiredWhenkey. you are finished exercising, remove Select one of the preset programs HOW to USE a Preset ProgramAdjust the intensity level of the program if Desired See on HOW to Create a Custom Program Select one of the custom programsHOW to USE a Custom Program Enter a maximum target heart rate setting HOW to USE a Heart Rate ProgramSelect a heart rate program Follow your progress with the displays HOW to Connect Your Portable Stereo HOW to Connect Your MP3 Player or CD PlayerAudio Cable HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Press the Play button on your MP3 player, CD Player, or VCRMeasure your heart rate if desired Follow the on-line instructions to start Program Directly from OUR WEB SiteReturn to the treadmill and stand on the foot HOW to Adjust the Cushioning System Information MODE/DEMO ModeOptional Chest Pulse Sensor HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R1204A Qty DescriptionOrdering Replacement Parts Exploded DRAWING-Model No. NTL12951 R1204A Limited Warranty

NTL12951 specifications

The NordicTrack NTL12951 is a state-of-the-art treadmill designed for fitness enthusiasts who value technology, performance, and an immersive workout experience. This model embodies an ideal blend of advanced features and user-friendly characteristics, making it a top choice for home gyms.

One of the standout features of the NTL12951 is its powerful motor. Sporting a robust 3.0 CHP motor, this treadmill can easily accommodate a range of workout intensities, from a light jog to intense intervals. This powerful motor ensures a smooth and quiet operation, allowing users to focus on their training without any distractions.

The NTL12951 is equipped with a spacious running surface, providing ample room for runners of all sizes. With a tread belt measuring 20 inches by 60 inches, users can enjoy a comfortable and unrestricted stride. Additionally, the adjustable incline feature allows users to modify their incline up to 12%, simulating an outdoor running experience and enhancing calorie burn.

For those who appreciate guided workouts, the treadmill comes with an extensive library of iFit workouts. With iFit technology, users can access a variety of on-demand programs led by top trainers, as well as global workout routes powered by Google Maps. This integration allows for a unique and motivating workout experience, tailored to individual fitness levels and goals.

Furthermore, the NordicTrack NTL12951 includes a large, intuitive touchscreen display that tracks key metrics such as speed, distance, time, and calories burned. The built-in Bluetooth compatibility allows users to connect their devices for a personalized workout experience, while the dual speakers provide an excellent audio experience for music or coaching.

Comfort is also addressed in this model, with features such as FlexSelect Cushioning, which allows users to customize the surface of the treadmill to their preference. Users can choose between a firmer surface for a more authentic running experience or a softer setting to reduce impact on joints.

In conclusion, the NordicTrack NTL12951 is a comprehensive treadmill that combines innovative technology, performance, and comfort. With its powerful motor, large running surface, adjustable incline, and extensive workout libraries, it makes an excellent addition to any home fitness setup, catering to all levels of runners and fitness enthusiasts.
Top Page Image Contents