NordicTrack NTL14942 user manual Extension Legs 102 remain in the Uprights

Page 7

4.With the help of a second person, carefully tip the Uprights (69) down as shown. Make sure that the

Extension Legs (102) remain in the Uprights.

Attach each Extension Leg (102) with two 1” Screws (26) and a Base Pad (99) as shown. Note: Attach the lower Screw (without the Base Pad) first.

With the help of a second person, carefully tip the Uprights (69) back to the vertical position.

Note: A replacement Base Pad (99) may be included. Use the Base Pad to replace any Base Pad that becomes worn.

5.Insert a Handrail (66) into each side of the console as- sembly. Note: It may be helpful to twist the Handrail as you insert it.

Cut the tie securing the Upright Wire Harness (98). Have a second person hold the console assembly near the Uprights (69). Connect the Upright Wire Harness to the wires extending from the Console Base (81). The connec- tors should slide together easily and snap into place. If they do not, turn one connector and try again. Insert the connectors and the Upright Wire Harness down into the right Upright, and then set the console assembly on the Uprights. Be careful not to pinch the wires.

6.Insert two Handrail Bolts (78) with 5/16” Star Washers (77) into the right Upright (69) and the right Handrail (66)

Be careful not to damage the Upright Wire Harness (not shown). Next, lift the right Handrail slightly and align the Bolts with the holes in the Handrail. (Note: If neces- sary, twist the Handrail to align the holes in the Handrail with the Bolts). Thread the Bolts into the Handrail. Do not tighten the Bolts yet.

Attach the left Handrail (not shown) in the same way. Then, tighten all Handrail Bolts (78). Note: There are no wires on the left side.

7.Attach the Upper Handrail (142) to the Uprights (69) with two 3” Bolts (17) and two Handrail Washers (19) as shown. Firmly tighten the Bolts.

8.Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 28). To protect the floor or car- pet from damage, place a mat under the treadmill.

4

 

 

 

69

 

 

 

 

 

 

99

102

99

 

102

 

26

 

 

 

26

 

 

 

5

 

 

81

 

 

 

 

 

98

 

 

 

 

69

 

66

 

Console Assembly

 

 

 

6

 

 

 

 

 

 

69

 

66

 

77

 

 

 

 

 

 

78

7

142

 

 

 

 

 

 

 

 

69

 

17

19

 

 

 

17

7

Image 7
Contents Model No. NTL14942 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Left Side Before YOU BeginRight Side Assembly Extension Legs 102 remain in the Uprights HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Features of the Console Getting Started Change the incline of the treadmill as desired HOW to USE the Manual ModeSelect the manual mode Start the walking beltTacts-avoid mov Distance/Laps-TheCalories/Pulse-When Measure your heart rate if desiredSelect the desired preset program HOW to USE Preset ProgramsWhenkey. you are finished exercising, remove Follow your progress with the displaysHOW to Create Custom Programs HOW to USE Custom Programs HOW to USE Heart Rate Programs Follow your progress with the displays HOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoAudio Adapter Cable HOW to Connect Your VCRPressVCR. the Play button on your CD player or Measure your heart rate if desired Follow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteReturn to the treadmill and stand on the foot Optional Chest Pulse Sensor Information MODE/DEMO ModeHOW to Adjust the Cushioning System HOW to USE the Aromatherapy SystemPLS2 HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillProblem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesKey Qty Description R0404APart Identification Chart Ordering Replacement PartsNo. NTL14942 142 108 115 107 Limited Warranty