NordicTrack a2550 pro warranty Console Wire Assembly Tie

Page 11

9.Set the console assembly face down on a soft surface to avoid scratching the console. Identify the Right Handrail (79). Hold the Right Handrail near the console assembly. Route the console wire through the large holes in the top and bottom of the Right Handrail.

Set the Right Handrail (79) on the Console Frame (81). Start a 1/4" x 1/2" Patch Bolt (8) with a 1/4" Star Washer (12) into the Right Handrail. Then, start two 5/16" x 1 1/2" Patch Bolts (4) with two 5/16" Star Washers (9) into the Right Handrail. Make sure the console wire is not pinched. Start all three Patch Bolts, and then tighten them.

Attach the Left Handrail (not shown) as de- scribed above. Note: There is not a wire on the left side.

10.With the help of a second person, hold the con- sole assembly near the Right Upright (83) and the Left Upright (not shown).

Connect the Upright Wire (85) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CON-

NECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire.

9

 

8

Console

 

79

12

4

 

Wire

 

 

 

 

9

Console

 

 

 

 

Assembly

 

 

 

81

 

 

 

 

10

Console

 

 

 

Assembly

 

 

 

Console

 

 

 

Wire

85

 

Wire

 

 

Console

 

Tie

83

 

 

Wire

 

 

 

85

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents On the WEB QUESTIONS?1CALL-800TOLL-TO-FREE-BE-FIT Model No. NTL08009.2 Serial NoTable of Contents Important Precautions Instructions Save TheseBefore YOU Begin Assembly Attach the other Wheel 95 in the same way Make sure that the power cord is unpluggedDo not fully fold the Frame yet Page Patch Bolts yet Not fully tighten the Patch Bolts yetSee the inset drawing. Orient the Left Upright Touch the Upright do not fully tightenTo overtighten the Screws Console Wire Assembly Tie 101 Tioned as shown PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Audio DiagramFeatures of the Console ConsoleInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Start the walking belt and adjust the speedMeasure your heart rate if desired. Before using Start the workout HOW to USE a Preset WorkoutSelect a preset workout HOW to USE the Stereo Sound System HOW to USE the Ifit Training ModeMetric Information ModeHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillCompatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Top Problem The walking belt slows when walked onConsole display has lines running through it Problem SolutionTurn if the walking belt has shifted to Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. NTL08009.2Qty R0910A Exploded Drawing B-Model No. NTL08009.2 Exploded Drawing C-Model No. NTL08009.2 Exploded Drawing D-Model No. NTL08009.2 Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

a2550 pro specifications

The NordicTrack A2550 Pro is a premier treadmill designed for fitness enthusiasts seeking an efficient and effective workout experience in the comfort of their own homes. Combining cutting-edge technology with superior engineering, this treadmill offers a plethora of features aimed at improving your fitness journey.

One of the standout features of the NordicTrack A2550 Pro is its powerful 3.0 CHP motor. This robust motor provides an adjustable speed range from 0 to 12 mph, enabling users to tailor their workouts according to their fitness levels. Whether you’re walking, jogging, or running, you’ll find smooth and reliable performance that can support various workout intensities.

The treadmill also boasts an impressive 15% incline capability. This feature not only allows users to increase workout intensity but also simulates outdoor running conditions, enhancing calorie burn and muscle engagement. The one-touch incline control makes it easy to adjust levels on the fly, keeping your workout dynamic and challenging.

Another significant aspect of the A2550 Pro is its 10-inch Smart HD touchscreen display. This interactive screen offers access to a variety of training programs and entertainment options. Users can engage with a library of on-demand workouts led by certified trainers. The iFit technology, included with the purchase of the treadmill, provides personalized training experiences and interactive workouts that adapt to your progress. Users can travel worldwide through Google Maps routes or participate in live classes, bringing a community aspect to home fitness.

The running surface measures a generous 20 x 60 inches, providing ample space to stretch out while running or walking. Additionally, the FlexSelect cushioning technology offers the option to adjust the treadmill's deck for maximum comfort, supporting your joints while allowing for a more natural running experience when desired.

Equipped with built-in speakers, Bluetooth connectivity, and a tablet holder, the A2550 Pro prioritizes user experience, making it easier to stay motivated with your favorite music or shows during workouts.

Safety features include a sturdy design and an easy-to-reach emergency stop switch, contributing to a secure workout environment.

In summary, the NordicTrack A2550 Pro is a versatile and advanced treadmill that embraces the modern fitness landscape, making it an ideal choice for anyone looking to elevate their indoor training regimen. With its powerful motor, incline features, and interactive technology, it demonstrates NordicTrack's commitment to quality and performance in the fitness equipment industry.
Top Page Image Contents