3. Identify the Right Upright Spacer (91), which is | 3 |
|
|
marked with a “Right” sticker. | 85 | 91 | |
See the inset drawing. Orient the Right Upright |
| ||
Spacer (91) with the two curved corners posi- |
|
|
|
tioned as shown. |
|
|
|
Insert the Upright Wire (85) through the Right |
|
| 94 |
Upright Spacer (91) as shown. Set the Right |
|
| |
Upright Spacer on the Base (94). |
|
|
|
|
| 91 |
|
| Curved |
|
|
| Corners |
|
|
4. Identify the Right Upright (83) which is marked | 4 |
|
|
with a “Right” sticker. | 83 |
| |
Have a second person hold the Right Upright |
|
| |
(83) near the Base (94). See the inset drawing. |
|
|
|
Tie the wire tie in the Right Upright securely | 85 |
|
|
around the end of the Upright Wire (85). Then, |
|
| |
pull the other end of the wire tie until the Upright |
|
|
|
Wire is routed completely through the Right |
| Wire Tie |
|
Upright. |
|
| |
|
|
| 94 |
| 85 | 83 |
|
| Wire |
| |
|
| Tie |
|
| 8 |
|
|