NordicTrack Troubleshooting for Treadmill Issues and Solutions
Page 22

TROUBLESHOOTING

Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 14). Use only a single-outlet surge suppres-

sor that meets all of the specifications described on page 14. IMPORTANT: The treadmill is not

compatible with GFCI-equipped outlets.

 

 

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the power switch located on the treadmill

c

 

frame near the power cord. If the switch protrudes

 

as shown, the switch has tripped. To reset the

Tripped

Reset

switch, wait for five minutes and then press the

switch back in.

 

 

PROBLEM: The power turns off during use

 

 

SOLUTION: a. Check the power switch (see the drawing above). If the switch has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console. Reinsert the key into the console.

d.If the treadmill still will not run, please see the front cover of this manual.

PROBLEM: The console displays remain lit when you remove the key from the console

SOLUTION: a. The console features a display demo mode, designed to be used if the treadmill is displayed in a

store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off

the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE

INFORMATION MODE on page 20 to turn off the demo mode.

PROBLEM: The displays of the console do not function properly

 

SOLUTION: a. Remove the key from the console and UNPLUG

a

THE POWER CORD. Place the treadmill in the stor-

age position (see HOW TO FOLD THE TREADMILL

 

on page 21). Remove the two #8 x 3/4" Screws (14).

 

Then, lower the treadmill (see HOW TO LOWER

14

THE TREADMILL FOR USE on page 21).

 

14

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model No. NTL08009.2 Serial No QUESTIONS?1CALL-800TOLL-TO-FREE-BE-FIT On the WEBTable of Contents Important Precautions Save These InstructionsBefore YOU Begin Assembly Do not fully fold the Frame yet Make sure that the power cord is unpluggedAttach the other Wheel 95 in the same way Page Touch the Upright do not fully tighten Not fully tighten the Patch Bolts yetSee the inset drawing. Orient the Left Upright Patch Bolts yetTo overtighten the Screws Console Wire Assembly Tie 101 Tioned as shown HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console DiagramFeatures of the Console AudioStart the walking belt and adjust the speed HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleMeasure your heart rate if desired. Before using Select a preset workout HOW to USE a Preset WorkoutStart the workout HOW to USE the Ifit Training Mode HOW to USE the Stereo Sound SystemInformation Mode MetricHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on TopTurn if the walking belt has shifted to Problem SolutionConsole display has lines running through it Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. NTL08009.2 Key No. Qty DescriptionQty R0910A Exploded Drawing B-Model No. NTL08009.2 Exploded Drawing C-Model No. NTL08009.2 Exploded Drawing D-Model No. NTL08009.2 Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT

a2550 pro specifications

The NordicTrack A2550 Pro is a premier treadmill designed for fitness enthusiasts seeking an efficient and effective workout experience in the comfort of their own homes. Combining cutting-edge technology with superior engineering, this treadmill offers a plethora of features aimed at improving your fitness journey.

One of the standout features of the NordicTrack A2550 Pro is its powerful 3.0 CHP motor. This robust motor provides an adjustable speed range from 0 to 12 mph, enabling users to tailor their workouts according to their fitness levels. Whether you’re walking, jogging, or running, you’ll find smooth and reliable performance that can support various workout intensities.

The treadmill also boasts an impressive 15% incline capability. This feature not only allows users to increase workout intensity but also simulates outdoor running conditions, enhancing calorie burn and muscle engagement. The one-touch incline control makes it easy to adjust levels on the fly, keeping your workout dynamic and challenging.

Another significant aspect of the A2550 Pro is its 10-inch Smart HD touchscreen display. This interactive screen offers access to a variety of training programs and entertainment options. Users can engage with a library of on-demand workouts led by certified trainers. The iFit technology, included with the purchase of the treadmill, provides personalized training experiences and interactive workouts that adapt to your progress. Users can travel worldwide through Google Maps routes or participate in live classes, bringing a community aspect to home fitness.

The running surface measures a generous 20 x 60 inches, providing ample space to stretch out while running or walking. Additionally, the FlexSelect cushioning technology offers the option to adjust the treadmill's deck for maximum comfort, supporting your joints while allowing for a more natural running experience when desired.

Equipped with built-in speakers, Bluetooth connectivity, and a tablet holder, the A2550 Pro prioritizes user experience, making it easier to stay motivated with your favorite music or shows during workouts.

Safety features include a sturdy design and an easy-to-reach emergency stop switch, contributing to a secure workout environment.

In summary, the NordicTrack A2550 Pro is a versatile and advanced treadmill that embraces the modern fitness landscape, making it an ideal choice for anyone looking to elevate their indoor training regimen. With its powerful motor, incline features, and interactive technology, it demonstrates NordicTrack's commitment to quality and performance in the fitness equipment industry.
Top Page Image Contents