Assembly: Parts Identifier
The Ironman Edge Treadmill will require assembly before operating. Place unopened box on a clean, level surface. After opening the box, remove any packing material from the treadmill.
Do not throw away any packing materials until the unit is working properly. Do not remove unit from box until it has been fully assembled.
Make sure the electrical cord will easily reach an electrical outlet.
If at anytime you need assistance with assembly, call
Locate the hardware pack and identify the following parts required for assembly.
Tools:
1.Allen Wrench- 3/16”
2.Allen Wrench- 7/32”
3.Phillips Screwdriver
ALLEN BOLT M8*30 | WASHER |
2 PCS | 6 PCS |
RIGHT OUTSIDE FENDER
ALLEN BOLT M8*15 | PHILLIPS SCREW ST4.2*16 |
4 PCS | 12 PCS |
RIGHT INSIDE FENDER
LEFT OUTSIDE HANDLE COVER | RIGHT OUTSIDE HANDLE COVER |
LEFT INSIDE FENDER
LEFT UPPER HANDLE COVER | RIGHT UPPER HANDLE COVER |
LEFT OUTSIDE FENDER | LEFT LOWER HANDLE COVER | RIGHT LOWER HANDLE COVER |