Horizon Fitness T1200 manual S E M B Ly, Unpacking, Tools Included, Parts Included

INTRODUCTION IMPORTANT PRECAUTIONS

A S S E M B LY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

WARNING

SPEAKERS	CONSOLE
	IPOD® DOCK
	READING RACK
WATER BOTTLE HOLDER
	SAFETY KEY PLACEMENT
GRIP PULSE HANDRAILS
	CONSOLE MAST
HANDLEBAR SIDE CAP
	HANDLEBAR

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

During the assembly process of the treadmill there are several areas that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play in the console masts or any forward and back play in the console assembly or handlebars. If there is any play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The

ON/OFF SWITCH

CIRCUIT BREAKER

POWER CORD

FOOT LOCK LATCH

CONSOLE MAST BOOT

TRANSPORT WHEELS

WHEEL LOCKS

MOTOR COVER

RUNNING BELT / RUNNING DECK

SIDE RAIL

ROLLER END CAP

REAR ROLLER

ADJUSTMENT BOLTS

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

Before proceeding, find your treadmill’s serial number and model name located to the left of the on/off

TOOLS INCLUDED

Screw Driver	13/15 mm Flat Wrench
5 mm T-Wrench	8 mm T-wrench
5 mm L-Wrench
PARTS INCLUDED

TREADMILL OPERATION

CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE

power switch and power cord and enter it in the space provided below.

Enter your serial number and model name in the boxes below:

SERIAL NUMBER:

MODEL NAME:

1 Safety Key

1 Console Assembly

2 Console Masts

2 Console Mast Boots

1 Power Cord

3 iPod ® Dock Inserts

1 iPod ® Docking Station Rubber Plug

1 Universal MP3 Player Insert

2 Handlebars

2 Handlebar Side Caps

2 Handlebar Side Cap Decals

5 Hardware Bags

1 Audio Adaptor Cable

1 Bottle of Silicone Lubricant

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

LIMITED

WARRANTY



*Refer to the serial number and model name when calling for service.

*Also enter this serial number on your Warranty Card.

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.horizonfitness.com



LIMITED WARRANTY

T1200_Treadmill_Rev.1.9.indd 6-7 6/22/07 4:44:45 PM